封边机HOMAG
KAL 210 AMBITION 2264
机器数据
技术细节
- 工件高度（最大）:
- 40 毫米
- X轴进给速度:
- 25 米/分钟
- 总长度:
- 7,755 毫米
- 控制器型号:
- PowerControl PC22
- 作业高度:
- 950 毫米
提供
- 位置:
- Nordrhein-Westfalen, 德国
– 距离：约 9,518 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€250.00 (约束性)
免费
描述
TECHNICAL DETAILS
Feed speed: 18 - 25 m/min
Max. feed speed with FK11: 20 m/min
Working height: 950 mm
Min. workpiece width (with workpiece thickness 12-22 mm): 60 mm (depending on workpiece length)
Min. workpiece width (with workpiece thickness 23-40 mm): 105 mm (depending on workpiece length)
Workpiece overhang: 30 mm
Workpiece thickness: 12 - 40 mm
Edgebanding material (roll): 0.3 - 3 mm
Max. edge cross-section (PVC): 135 mm²
Max. edge cross-section (veneer): 100 mm²
Max. roll diameter: 830 mm
Edgebanding material (strips): 0.4 - 20 mm
Max. edge cross-section (strips): 900 mm²
MACHINE DETAILS
Control: PowerControl PC22
Pneumatic connection: 7 - 8 bar
Total length: 7,755 mm
Operating hours: approx. 29,000 h
EQUIPMENT
Workpiece support in scissor-lift version with roller support, extendable by 1,000 mm
Automatic infeed guide adjustment
Fixed fence on left side
Infeed stop pneumatically controlled
Top pressure via driven composite V-belt
Electric height adjustment
Workpiece transport device via transport chain with rubber covering
Release agent spray unit, top/bottom
Jointing cutter unit 2 x 3 kW
Edgebander A20 with 2 rollers, consisting of workpiece pre-heating, Quickmelt application unit with quick-release system, 2-roller magazine, pressure zone C (automatically adjustable, with 1 pre-press roll and 6 post-press rolls)
End trimming unit HL84 0.8 kW, with automatic adjustment for bevel/straight cut and pneumatic adjustment for flush/excess trimming
Pre-milling unit 1.5 kW, pneumatic adjustment for flush/
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A21067552
- 参考编号:
- AUC-2601180
- 更新:
- 最近更新时间为 26.01.2026
- 独家优惠:
- 仅在拍卖中提供
参观
意大利 HOMAGKAL 210 AMBITION 2264
Wijchen FelderPerfect 608
Picassent HOMAGKAL 210 AMBITION 2264
意大利 HOMAGKAL 210 AMBITION 2264
Gronau (Westfalen) IMAQuadromat 3512 U
Comunidad Valenciana HOMAGKAL 210 AMBITION 2264
Sesto Calende HomagKal 210 Ambition 2264
Nordrhein-Westfalen HOMAGOPTIMAT KL 310 / 8 / A20 / S2
Comunidad Valenciana HOMAGKAL 210 AMBITION 2264
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。