Edgebander

HOLZ-HER AURIGA 1308XL

158.000 running metres

BASE MACHINE AURIGA 1308XL

TECHNICAL DATA
Edge banding machine for edgebanding and finishing of sheet materials
Edge thickness of roll material: 0.4-3mm (depending on material)
Edge thickness of strip material: 0.4-8mm (depending on material)
Edge cross-section: max. 6x42mm
Edge height: max. 65mm Workpiece thickness: 8-60mm
(restrictions possible for individual units)
Workpiece width: min.65mm
Workpiece length: min.160mm (without corner copying 1832)
Workpiece length: min.180mm Feed speed: 10m/min.

MACHINE OPERATION
Edge Control 19
with 18.5" touchscreen colour monitor 16:9 Powerful control system with extremely simple operation for efficient machine set-up and changeover.
Rotating and swivelling control panel at eye level

Motorised pressure bridge adjustment

iTronic - Adaptive pressure and adhesive quantity control
Automatic, programme-dependent fine adjustment
Optimum adaptation to edge thickness, edge materials and adhesive types guarantees the best processing results Automation package consisting of
- Automatic glue quantity control
- adaptive snipping knife
- adaptive printing unit
incl. residual adhesive quantity display
incl. fully automatic PUR flushing routine

Premilling unit FG201 with 2 milling heads
for joining the panel edge
1x counter-rotating, 1xsynchronised,

Milling cutter, diamond Ø70x64x30 mm,Z2+2

Edge feeder 1903
automatic transport of rolls and strips
max. loading capacity: 40 mm
Glu Jet GJ301 glue application system (2,3kW,50Hz)
Automatic glue height adjustment

Glu Jet hybrid technology for EVA and PUR adhesives
Adhesives in cartridge and granulate form
for neutral and coloured adhesives

Hopper for 1.4 kg cartridges (4 cartridges)
Hopper for 1.5 kg granulate

Pneumatic pressure unit 1912-3
First roller driven with pneumatic immersion control, 2 conical holding pressure rollers
Bdedpfx Afsxayvpetok

Cutting unit 1918 (60 mm) pneumatic
(2 x 0.45 kW, 12000 min-1) pneumatic swivelling 0/10°

Dust extraction hoods for end trimming unit 1918

Multifunctional trimming unit 1827 MOT4
for trimming the top and bottom longitudinal edge
with motorised positioning of the horizontal tracing shoes
with motorised positioning of the trimming motors in axial direction
incl. pneumatic adjustment (top and bottom separately) for flush-radius routing incl. blow nozzles
- Flush cutting unit
- Radius
- Tilt the chamfer 0 - 15°, manually (with max. edge thickness 6 mm)

Pneumatic swivelling device
for trimming unit 1827 MOT4
Pneumatic swivelling to bevel 15° from the control unit

Pneumatic vertical tracer rollers
Adjustment of the vertical tracer roller by 0.1 mm for routing with edge overhang

Corner rounding unit (1x0,35kW,200Hz,12000min-1)
Corner copying function up to 3 mm edge thickness
Workpiece thickness: 12 - 60 mm, with DIA tool R=2mm

Scraper unit 1929 MOT4 incl. high-gloss package with motorised adjustment of the horizontal feeler rollers, incl. pneumatic adjustment (separate top and bottom)

Surface scraper FK701
With pre- and post-scraping for removing the adhesive residue along the
complete panel length for a clean glue joint.

Buffing unit 1940
(2 x 0,09 kW, 50 / 60 Hz, 1400 min-1)
For finishing and polishing edges, with 2 textile discs,
swivelling 0 - 5°