试模用500吨液压压力机

Hidroliksan HCFP

HIDROLIKSAN HCFP – 500-t Hydraulic Tryout / Toolmaking Press for Tool and Forming Technology

The machine is a tryout/tool tryout press designed for tooling in the fields of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power.

The press features a robust 4-column design, a spacious working area, and a hydraulic unit equipped with REXROTH pump technology. Control is managed via a SIEMENS S7-1200 with touch panel and extensive parameterization options.

Scope of Delivery & Accessories
- GÜTHLE tool sliding and lifting ball system
- Hydraulic foot pedal (GÜTHLE)
- Roll stand / support console 10 t (GÜTHLE)
- 4-channel tool holder system (length 1500 mm, 2 t per channel)
- Complete REXROTH hydraulic unit
- Air cooler
Dsdpfx Ajx D Tv Djftola
- Foundation plans / manufacturer documentation

Condition of the Machine
- Fully functional
- Hydraulic system leak-free and runs smoothly
- Controls & electricals in good condition
- Mechanically sound, no visible damage
- The machine is assembled and can be demonstrated under power.

Press Force:
- Rated force: 500 t
- Max press force at 250 bar: approx. 510 t

Dimensions & Weight:
- Overall dimensions (approx.): 3500 × 2400 × 6000 mm
- Total weight: approx. 45,000 kg

Working Area:
- Table size: 2000 × 1500 mm
- Internal column spacing: 2000 × 900 mm
- Installation height: 1000 mm
- Stroke: 800 mm (linearly adjustable via linear measuring system)
- T-slots (mounting defined by the customer)

Hydraulic System:
Main Cylinders:
- Quantity: 2
- Piston Ø: 340 mm
- Rod Ø: 280 mm
Auxiliary/Plan Cylinders:
- Quantity: 2
- Piston Ø: 120 mm
- Rod Ø: 70 mm
Die Cushion:
- Force: 150 t
- Cylinders: 2 × Ø 310 × 210 mm
- Stroke: 400 mm

Pumps and Tank:
- Pump: REXROTH axial piston pump, 100 ccm, approx. 150 L/min
- Hydraulic tank: 1200 L
- Oil system: 1000 L capacity

Speeds:
- Approach stroke: 120 mm/s
- Return stroke: 150 mm/s
- Working/pressure stroke: 12 mm/s

Control & Safety:
Control:
- SIEMENS S7-1200 + ET200S
- 12" touch panel Schneider Electric
Operating Modes:
- Two-hand automatic
- Setup mode
- Single stroke
- Stroke without die cushion
- Deep drawing mode with die cushion
Measurement & Safety Features:
- Linear measurement system Novatechnik (63 Bit) for slide and die cushion
- SICK safety light curtains front and rear (height: 1050 mm)
- Side safety fencing with limit switches
- Remote maintenance via Ethernet possible
- Mobile operator panel

International Notice Block (DE/EN)
German:
Dismantling, deinstallation, loading and transport are exclusively the responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide equipment, personnel, or loading assistance. Collection only after prior appointment.

English:
Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020).

Location: Saxony, Germany

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。