加工中心HERMLE
C 400
技术细节
- X轴行程:
- 850 毫米
- Y轴行程:
- 700 毫米
- Z轴移动距离:
- 500 毫米
- 最大转速:
- 15,000 转/分
- 刀库刀位数量:
- 38
- A轴回转角（最小）:
- -139 °
- A轴回转角度（最大）:
- 91 °
- C轴回转角（最大）:
- 360 °
提供
- 位置:
- Baden-Württemberg, 德国
– 距离：约 9,604 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- EXW
免费
描述
Recently, an identical machine was successfully auctioned!
The bid obliges you to pick up the item on time by March 31, 2025!
TECHNICAL DETAILS
X-axis travel: 850 mm
Y-axis travel: 700 mm
Z-axis travel: 500 mm
Controltype: Heidenhain TNC 640
Rapid traverse linearXYZ: 35 - 35 - 35 m/min
Acceleration linearXYZ: 6 m/s²
Feed force linearXYZ: 7,000 N
jaw widthmax.: 625 mm
workpiece dimensions
Max. diameter: Ø 650 mm
Height max.: 500 mm
Interference circle (A-axis) in 0° position: Ø 885 mm
spindle data
Speed: 15,000 rpm
Power/torque: 20% ED, 20 kW / 173 Nm
Tool holder: SK 40
tool interface
Type: SK 40
Magazine slots: 38 pieces
Chip-to-chip time: approx. 6 s
Tool length: max. 300 mm
Tool diameterfor adjacent space occupancy: Ø 80 mm
Tool diameter without adjacent space occupancy: Ø 125 mm
Tool weight: max. 8 kg
Magazine load: max. 152 kg
swivel rotary table
clamping surface: Ø 650 x 540 mm
Center hole: Ø 32 H7
Swivel range: +91° / -139°
Drive type C-axis: worm
Speed of swivel axis A: 25 rpm
Speed of rotation axis C: 30 rpm
Table loadSingle-sided drive: 600 kg
accuracy according to ISO 230-2
Deviation (A in XYZ axis): ≤ 0.006 mm
cooling system (IKZ)
Standard tank capacity: 122 l
Cooling lubricant tank capacity: max. 570 l at 40 bar
Pressure: max. 40 bar
Flow rate: 11/27 l/min
Mains connection (IKZ): 400 V / 50/60 Hz
Power consumption (IKZ): up to 20 kVA
Filter: Police filter, paper band filter
operating pressure
Hydraulic pressure: 120 bar
Compressed air: 6 bar
Lubrication system: minimum quantity grease lubrication
MACHINE DETAILS
Control switch-on time: 24,403 h
Machine on-time: 23,349 h
program run: 16,193 h
Spindle time: 13,916 h
Weight: approx. 9.5 t
power connection
Voltage: 400 V / 50/60 Hz
Power consumption: up to 30 kVA
EQUIPMENT
- BLUM measuring probe
- BLUM tool laser measurement
- Pull-out chip drawer
- swivel rotary table
- chip flushing gun
- emulsion mist extraction
- scraper belt conveyor
- blow-off device
- Blowing air through the spindle center
- Manual cabin door
- Manual cabin roof
- Polycarbonate safety windows
- Electrical heat compensation from Heidenhain.
- Electric hand control module from Heidenh
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A18655341
- 參考編號:
- AUC-2501218
- 最後更新:
- 於 10.03.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Aach HermleC 400 U
Bad Emstal HERMLEC 400 U
Lauchheim HERMLEC 400 V
Baden-Württemberg HERMLEC 400
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。