通用加工中心Hermle
C 30 U
技术细节
- X轴行程:
- 650 毫米
- Y轴行程:
- 600 毫米
- Z轴移动距离:
- 500 毫米
- 控制器型号:
- Siemens Sinumerik 840 D pl
- 主轴速度（最大）:
- 28,000 转/分
提供
- 位置:
- Nordrhein-Westfalen, 德国
– 距离：约 9,402 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€2,000.00 (约束性)
免费
描述
TECHNICAL DETAILS
Travel distances
X-axis travel: 650 mm
Y-axis travel: 600 mm
Z-axis travel: 500 mm
Main spindle
Main spindle speed range: 20 - 28,000 rpm
Main spindle drive power: 23 / 18 kW
Max. torque: 79 Nm
Tool holder: HSK-A63
NC rotary swivel table
Clamping surface: Ø 630 mm
Swivel range A: +30° / -115°
Rotatable C: 360°
Max. table load: 500 kg
Max. workpiece dimensions: Ø 630 x 313 mm
Table speed A: 25 / C: 65 rpm
Tool changer
Number of tool pockets: 117
Max. tool diameter: 90 mm
Max. tool length: 300 mm
Feed rates
Rapid traverse (X / Y / Z): 60 m/min
Acceleration: 10 m/s²
Thrust force: 8.5 kN
MACHINE DETAILS
Control: Siemens Sinumerik 840 D pl
Space requirements & weight
Approx. space requirement: 8.5 x 5.5 x 3.0 m
Approx. machine weight: 10,500 kg
Total power requirement: 43 kVA
Operating hours: 48,702 h
EQUIPMENT
Documentation
High-pressure cooling
Coolant system
Internal coolant supply: 80 bar / 1,300 l
Electronic handwheel
Full enclosure
Pallete pool FASTEMS / 15 pos.
Chip conveyor
Paper band filter
Renishaw probe
Tool breakage monitoring
Note: The transport rigging must be organized by the buyer. The pallet system cannot be inspected under power. The Fastems computer is defective.
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A19977945
- 參考編號:
- AUC-2509020
- 最後更新:
- 於 11.09.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Baden-Württemberg, Deutschland HermleC30 U
Oelde HERMLEC 30 U 689
Schömberg HERMLEC30 U
荷兰 HERMLEC30U + RS automation
Norderstedt HermleC30U dynamic
Wilbertoord HERMLEC 30 U
Oelde HERMLEC 30 U 778
Schömberg HERMLEC30 U
Oelde HERMLEC 30 U Fertigungszelle
Schömberg HERMLEC30 U
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。