曲轴加工机Heller
DRZ20-2-1250
曲轴加工机
Heller
DRZ20-2-1250
VB 不含增值税
€86,000
出厂年份
2005
状况
二手
(未经检验)
位置
Nordhausen 

基本数据
价格和位置
VB 不含增值税
€86,000
- 位置:
- Rothenburgstraße 27, 99734 Nordhausen, Deutschland

拨打
优惠详情
- 广告编号:
- A22131237
- 更新:
- 最近更新时间为 16.06.2026
描述
46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles.
Control: Siemens 840D
Tool holder: Heller turning broaching wheel
45 tool positions around the circumference
Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge.
NC-controlled steady rest supports – without steady rests
Retractable 3-jaw chuck on both sides, manufactured by Blessing
Automatic loading door from above with a loading interface
Dedicated chip conveyor with high discharge
The machine can currently be inspected while powered on.
Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools.
Safeguarding of the control system and drives is included – delivery free to site.
This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible.
Year of production: 2005
Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles
Machine control: Siemens 840D
Tool adapter: Heller turning broaching wheel
45 tool positions around the circumference
Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier.
Ijdpfx Acszdpvgsaotp
NC-controlled roller support – no workrest included
Retractable 3-jaw chuck on both sides from Company Blessing
Automatic gantry door for overhead loading and corresponding interface
Individual chip conveyor with high drop
Machine can be inspected while powered on upon request
Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling
Safeguarding of control and drives included – free location
Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.
该广告为自动翻译,可能存在翻译错误。
Control: Siemens 840D
Tool holder: Heller turning broaching wheel
45 tool positions around the circumference
Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge.
NC-controlled steady rest supports – without steady rests
Retractable 3-jaw chuck on both sides, manufactured by Blessing
Automatic loading door from above with a loading interface
Dedicated chip conveyor with high discharge
The machine can currently be inspected while powered on.
Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools.
Safeguarding of the control system and drives is included – delivery free to site.
This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible.
Year of production: 2005
Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles
Machine control: Siemens 840D
Tool adapter: Heller turning broaching wheel
45 tool positions around the circumference
Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier.
Ijdpfx Acszdpvgsaotp
NC-controlled roller support – no workrest included
Retractable 3-jaw chuck on both sides from Company Blessing
Automatic gantry door for overhead loading and corresponding interface
Individual chip conveyor with high drop
Machine can be inspected while powered on upon request
Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling
Safeguarding of control and drives included – free location
Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2024
1 在线广告
发送询价
电话 & 传真
+49 3631 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Eisfeld
9,318 km
卧式加工中心
Heller+FPT1000HF5500+FPT1000
Heller+FPT1000HF5500+FPT1000
成功
您的消息已发送。
小广告
Paitone
9,624 km
数控车床
DAEWOOPUMA 240
DAEWOOPUMA 240
成功
您的消息已发送。
小广告
Paitone
9,624 km
数控车床
DAEWOOPUMA 300 LM
DAEWOOPUMA 300 LM
成功
您的消息已发送。
小广告
加拿大
9,792 km
CNC车床-斜床身机
Niles SimmonsN30 - 3MC-2500
Niles SimmonsN30 - 3MC-2500
成功
您的消息已发送。
小广告
Stefansdorf
9,249 km
砂轮修整机
GWD INDUSTRIAL GmbHGWDress-250 mit Einhausung
GWD INDUSTRIAL GmbHGWDress-250 mit Einhausung
成功
您的消息已发送。
小广告
Miskolc
8,789 km
加工中心
CHIRONDZ 18.2 KW HS
CHIRONDZ 18.2 KW HS
成功
您的消息已发送。
小广告
Hódmezővásárhely
8,897 km
气门座铣床
A-M, Serdi, Comec, Carmec, Kwik-way, PegVSM3.0 DRO
A-M, Serdi, Comec, Carmec, Kwik-way, PegVSM3.0 DRO
成功
您的消息已发送。
小广告
Korntal-Münchingen
9,517 km
基金会中心
PfiffnerRT100/12-26
PfiffnerRT100/12-26
成功
您的消息已发送。
小广告
Derendingen
9,711 km
中心孔磨床
Technica14-M-110 Center Hole Grinding Machine
Technica14-M-110 Center Hole Grinding Machine
成功
您的消息已发送。
小广告
Dorsten
9,481 km
齿轮磨床
HÖFLERH 1500
HÖFLERH 1500
您的广告已成功删除
发生错误











































































































