封边机

Hebrock AKV 3006 DK-F

Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm.

Technical description:
with hot melt adhesive application to the workpiece for edge material up to 3 mm.
60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit,
maintenance-free, coated adhesive reservoir,
HF trimming station (16,000 rpm) for front and rear edge overhang,
HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side,
free spaces for additional processing units (Hebrock system),
feed rate approx. 10 m/min,
cutting depth adjustment of the trimming saw,
signal lamp for workpiece sequence,
robust chain drive,
ergonomically arranged control panel,
double roller pressure beam,
unit viewing windows from the rear and operator side of the machine,
PLC control including touchscreen.

Technical data:
- Feed speed 10 m/min.
- Board thicknesses from 8 - 40 mm
- Weight: depending on the equipment, approx. 1550 kg
- Dimensions (L x W x H) 5250 x 1445 x 1600 mm
Airtronic incl. cooling and antistatic spraying device 2014, 1 unit
Hot air unit for creating an optical zero joint using special edge materials designed for this purpose.
- including pneumatic adhesive reservoir positioning
- including cooling and antistatic spraying device
- including 2 additional edge channels in quick-change design
- including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm
- exclusively for Hebrock edge banding machines of the 3000 series
- retrofitting possible later - additional costs upon request
Technical data:
- max. board thickness 40 mm
- max. edge thickness 1.2 - 2.0 mm
- 7 - 10 m/min feed speed
- Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled
- ready for operation after approx. 2 min
Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness
including pneumatic saw adjustment
Lodpfsx S Hmzjx Ahqeag
special version, minimum workpiece thickness 8 mm, 1 unit
3-point pneumatic milling adjustment, 1 unit
Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point.
PLC control is essential.
Cleaning station (wiper), 1 unit
Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm.
Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm.
Flat pull blade, 1 unit, with pneumatic feed control.
Chassis complete, 1 unit
Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir.
- including the possibility of processing PU adhesive with the machine
Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device.
Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm
Special version, dado cutter motor with higher motor power, 1 unit
Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine
Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit
Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit
Release agent spraying dev

该广告为自动翻译，可能存在翻译错误。