大厅建设

Graf Leichtbauhalle

The halls are constructed from galvanized steel sheet. The vertical supports (Figure 2) are also made of double-layer galvanized sheet and are not concreted in. A strip foundation made of wood/metal was built and secured to the ground with ground anchors, onto which the hall framework was placed and screwed. (20 mm nuts)
During disassembly, unscrew the sheet metal cladding; the longitudinal beams are only clipped in. If you release the lateral, diagonal braces, you can fold the individual frames together. If the loading area is short, you can separate the frames in the middle.
We have indicated the functionality as limited. This is not entirely accurate, but it is intended to emphasize that there are also minor collision damages where the sheet metal is dented. This concerns hall 2B – 92m x 16m = 1,460 square meters.

We will be closing the site on December 31, 2026, which is why we cannot offer any guarantee or warranty. Therefore, we are selling everything as DIY material or spare parts. Until December 31, we can assist with loading using a forklift. The hall must be dismantled by the buyer!!!
Fsds Ai Rmgspfx Ac Dspp
Four new, electric sectional doors were installed in the hall four months ago, for which we will charge an additional 4,000.00 € (gross) each!

Inspections can be arranged on weekdays during normal office hours, subject to prior appointment.

该广告为自动翻译，可能存在翻译错误。