数控车铣中心Gildemeister
MF Sprint 65
机器数据
- 机器名称:
- 数控车铣中心
- 制造商:
- Gildemeister
- 型号:
- MF Sprint 65
- 机器编号:
- 501637
- 出厂年份:
- 1997
- 状况:
- 非常好（已使用）
- 功能性:
- 完全功能
- 运行小时数:
- 65,543 h
技术细节
- 最大转速:
- 4,500 转/分
- 棒材直径（最大）:
- 65 毫米
- 刀库刀位数量:
- 16
- 设备:
- 文档 / 手册
提供
- 位置:
- Oberösterreich, 奥地利
– 距离：约 9,229 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- EXW
免费
描述
No reserve price - guaranteed sale at the highest bid!
TECHNICAL DETAILS
Control: Sinumerik 840C
Bar loader: Irco RBK 7212, built in 1999
Rod length: 1 m
Rod diameter/spindle bore: 65 mm
spindle
Main spindle: Hainbuch chuck
Counter spindle: 3-jaw chuck
Main drive
Drive power: 28 / 21 kW
Speed range: 25 – 4,500 rpm
Torque: 320 / 240 Nm
Path feed for thread cutting: max. 10 m/min
C-axis speed: 120 rpm
C-axis torque (holding torque): 180 Nm
tool carrier
Number of tools: 8
Shaft diameter according to DIN 69880: 30 mm
Number of driven tool stations: 4
Power: 7.6 / 4.6 kW
Torque: 24 / 14.7 Nm
Speed of tool carrier 1: max. 4,000 rpm
Speed of tool carrier 2: max. 4,000 rpm
Sleigh 1
Planar travel / longitudinal travel: 155 / 280 mm
Rapid traverse speed X/Z: 22.5 / 22.5 m/min
Feed force X/Z: 900 / 900 daN
Threaded spindle pitch X: 15 × 25 mm
Threaded spindle pitch Z: 15 × 32 mm
Sled 2
Planar travel / longitudinal travel: 82 / 120 mm
Rapid traverse speed X/Z: 22.5 / 22.5 m/min
Feed force X/Z: 900 / 900 daN
Threaded spindle pitch X/Z: 15 × 25 mm
MACHINE DETAILS
Operating hours: 65,543 h
Dimensions including bar loader and chip conveyor (LWH): approx. 6 × 2 × 2 m
Weight: approx. 6.5 t
Operating volta
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A19149636
- 参考编号:
- AUC-2505023
- 更新:
- 最近更新时间为 15.05.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Lüdenscheid GILDEMEISTERMF Sprint 65
Gussago ORTRP18
Mezőkövesd GildemeisterMF Sprint 65
德国 GILDEMEISTERMF Sprint 65
Cuggiono AWEABM-1500 II
Hagen Deckel MahoDMU 80 P Hi-Dyn
德国 Nakamura-TomeSuper NTJ
德国 Präziweceltic 12
Korschenbroich SAUTERVDI 20
Nattheim SCMPratix N 12
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。