制作球形的蔬菜剖面机Formit
Pro-X
制作球形的蔬菜剖面机
Formit
Pro-X
狀況
二手
位置
Mezőszemere 

顯示圖片
显示地图
机器数据
价格和位置
- 位置:
- Szabadság út 80., 3378 MEZŐSZEMERE, Magyarország

撥打
优惠详情
- 產品ID:
- A16698871
- 最後更新:
- 於 17.01.2025
描述
Formit PRO X
The FORMIT ProX is designed from aluminium (anodized) and stainless steel. The profiler is suitable for smaller installations with a ready product production capacity of up to 150 kg/ hour.
The ProX profilers are suitable for producing balls sized between 17 and 33 mm.
Caodpfjt Sxt Dox Aftoa
The feeding of the raw material into the ProX is important for successful production results. It is recommended to place a good speed controlled conveyor in front of the profiler.
Raw materials, such as potatoes and carrots (cut), can be successfully used. Cube shaped raw material can also be used.
It is recommended to pre-peel all the raw material before use. Pre-peeled raw material improves the quality of the final product, increases the capacity and extends the user-life of the cutting edges on the shaping rolls.
After the shaping process, it is recommended that the products are washed.
For removal of the secondary product, we recommend the installation of a pump or some other transportation system underneath the machine. When producing balls from a pre-peeled product of a good size, the quantity of the secondary product may be almost the same as the primary product produced.
The FORMIT ProX is designed from aluminium (anodized) and stainless steel. The profiler is suitable for smaller installations with a ready product production capacity of up to 150 kg/ hour.
The ProX profilers are suitable for producing balls sized between 17 and 33 mm.
Caodpfjt Sxt Dox Aftoa
The feeding of the raw material into the ProX is important for successful production results. It is recommended to place a good speed controlled conveyor in front of the profiler.
Raw materials, such as potatoes and carrots (cut), can be successfully used. Cube shaped raw material can also be used.
It is recommended to pre-peel all the raw material before use. Pre-peeled raw material improves the quality of the final product, increases the capacity and extends the user-life of the cutting edges on the shaping rolls.
After the shaping process, it is recommended that the products are washed.
For removal of the secondary product, we recommend the installation of a pump or some other transportation system underneath the machine. When producing balls from a pre-peeled product of a good size, the quantity of the secondary product may be almost the same as the primary product produced.
这些广告您可能也感兴趣。
小广告
Mezőszemere
8,826 km
苹果去核器、削皮器和切片器
FeumaASETSM-E
FeumaASETSM-E
小广告
Bury St Edmunds
9,791 km
内联式皮带格栅
FramptonFG-1-28-P/S
FramptonFG-1-28-P/S
小广告
Ystad
8,880 km
切片
TREIFMUSTANG
TREIFMUSTANG
小广告
Urk
9,496 km
Bandall BA 24 / 15-50 包带机
BandallBA 24 / 15-50
BandallBA 24 / 15-50
小广告
Ystad
8,880 km
托盘密封器
Sealpac350
Sealpac350
小广告
Sevenum
9,549 km
锡板接近
LubecaLW202
LubecaLW202
小广告
Mezőszemere
8,826 km
根菜/土豆清洗机
HerbertVegetable Washer
HerbertVegetable Washer
小广告
Lipsko
8,520 km
3 道灌装和封口机。
Grunwald-HITTPACAKH-059/3
Grunwald-HITTPACAKH-059/3
小广告
Mezőszemere
8,826 km
切菜机或切肉机
FamCMD-3D
FamCMD-3D
小广告
Bury St Edmunds
9,791 km
水果切块机
ABLGTF
ABLGTF
您的广告已成功删除
发生错误
































































































