低平台半挂车Fliegl
SES 210 Schatzträger für LKW Transport
低平台半挂车
Fliegl
SES 210 Schatzträger für LKW Transport
出厂年份
2026
状况
全新
(完全功能)
位置
Triptis 

价格和位置
- 出租:
- 可能
- 位置:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

拨打
技术细节
- 空载重量:
- 6,100 千克
- 最大载重重量:
- 14,900 千克
- 总重量:
- 21,000 千克
- 车轴配置:
- 1 轴
- 装载空间长度:
- 9,930 毫米
- 装载空间宽度:
- 2,540 毫米
- 货舱高度:
- 850 毫米
- 总长度:
- 13,680 毫米
- 总宽度:
- 2,550 毫米
- 悬挂系统:
- 空气
- 轮胎尺寸:
- 235/75 R17,5"
- 轮胎状况:
- 100 百分比
- 颜色:
- 原装
优惠详情
- 广告编号:
- A8265512
- 更新:
- 最近更新时间为 21.07.2026
描述
Customized transport solution *(Vehicle shown for illustration only. Production and equipment according to customer requirements.)*
Ppjdpei Ri Hkofx Aahsw
# Low Loader Semi-Trailer Chassis
Heavy-duty welded steel construction with replaceable 2" kingpin. Low bed sloping from the wheel area to the gooseneck with approx. 210 mm loading height. Rear section sloping towards the axle area. Full-width rear ramp support for aluminium loading ramps.
Wheel chocks with holders. Aluminium side underrun protection. Removable galvanized steel wheel covers. 10 t rear towing eye.
Spare wheel with holder mounted externally at the front on the headboard/toolbox.
Lockable steel toolbox mounted crosswise on the front gooseneck (approx. L 2,400 × W 400 × H 600 mm).
24 V electric winch with 8,165 kg pulling capacity, mounted on the gooseneck behind the toolbox. Wireless remote control, 35 m steel cable (approx. Ø10 mm), roller fairlead and two removable guide rollers on the gooseneck and rear loading slope. NATO socket on front connection panel.
1 pair of recessed wheel wells starting approx. 700 mm behind the gooseneck, open towards the outside. Main frame protrudes approx. 145 mm.
4 pairs of mounting positions for wheel chocks (Fliegl standard), removable wheel chocks included.
For transporting tractor units, front wheel well spacer blocks (approx. 50 mm high) included.
# Lashing Equipment
2 pairs of 2.5 t lashing rings on the gooseneck
7 pairs of recessed 10 t lashing mushrooms in the outer frame (top and side)
4 pairs of recessed 10 t lashing rings in the main longitudinal beams
1 central rear screw-type lashing point, 6.7 t (JDT)
1 additional front folding lashing ring in the low bed, 10 t
# Axle + Suspension
SAF drum brake axle
Air suspension with raise/lower valve
# Wheels and Tyres
235/75 R17.5 tyres from leading manufacturers
Twin steel wheels, factory silver finish
# Brake System
Dual-line compressed air braking system
Spring parking brake
2 non-interchangeable air couplings at front
Electronic Braking System (EBS) with front EBS socket
Note: Trailer may only be operated with towing vehicles providing full ABS functionality.
# Electrical System
24 V electrical system
LED multi-chamber rear lights
Yellow LED side marker lights
LED number plate lighting
LED front position lights
LED rear outline marker lights (white/red)
2 × 7-pin and 1 × 15-pin front sockets
LED rotating beacon with holder, activated via parking lights
Additional LED work light at rear, activated via reverse gear
# Floor
Steel chequer plate on gooseneck
Perforated steel low-loader deck with chequer plate in wheel well area
Removable steel covers above wheel arches
Perforated steel rear loading slope
# Side Walls
400 mm aluminium side boards on the gooseneck, removable, approx. 2,500 mm long
400 mm removable aluminium rear board on the gooseneck
# Loading Ramps
Pair of aluminium loading ramps, max. capacity 12,000 kg per pair, approx. 3,400 × 320 mm
Rear ramp storage compartment between the longitudinal beams
# Registration / Marking
Prepared for German registration
Single-line number plate holder
ECE R48 reflective contour markings (white sides, red rear)
Ppjdpei Ri Hkofx Aahsw
# Low Loader Semi-Trailer Chassis
Heavy-duty welded steel construction with replaceable 2" kingpin. Low bed sloping from the wheel area to the gooseneck with approx. 210 mm loading height. Rear section sloping towards the axle area. Full-width rear ramp support for aluminium loading ramps.
Wheel chocks with holders. Aluminium side underrun protection. Removable galvanized steel wheel covers. 10 t rear towing eye.
Spare wheel with holder mounted externally at the front on the headboard/toolbox.
Lockable steel toolbox mounted crosswise on the front gooseneck (approx. L 2,400 × W 400 × H 600 mm).
24 V electric winch with 8,165 kg pulling capacity, mounted on the gooseneck behind the toolbox. Wireless remote control, 35 m steel cable (approx. Ø10 mm), roller fairlead and two removable guide rollers on the gooseneck and rear loading slope. NATO socket on front connection panel.
1 pair of recessed wheel wells starting approx. 700 mm behind the gooseneck, open towards the outside. Main frame protrudes approx. 145 mm.
4 pairs of mounting positions for wheel chocks (Fliegl standard), removable wheel chocks included.
For transporting tractor units, front wheel well spacer blocks (approx. 50 mm high) included.
# Lashing Equipment
2 pairs of 2.5 t lashing rings on the gooseneck
7 pairs of recessed 10 t lashing mushrooms in the outer frame (top and side)
4 pairs of recessed 10 t lashing rings in the main longitudinal beams
1 central rear screw-type lashing point, 6.7 t (JDT)
1 additional front folding lashing ring in the low bed, 10 t
# Axle + Suspension
SAF drum brake axle
Air suspension with raise/lower valve
# Wheels and Tyres
235/75 R17.5 tyres from leading manufacturers
Twin steel wheels, factory silver finish
# Brake System
Dual-line compressed air braking system
Spring parking brake
2 non-interchangeable air couplings at front
Electronic Braking System (EBS) with front EBS socket
Note: Trailer may only be operated with towing vehicles providing full ABS functionality.
# Electrical System
24 V electrical system
LED multi-chamber rear lights
Yellow LED side marker lights
LED number plate lighting
LED front position lights
LED rear outline marker lights (white/red)
2 × 7-pin and 1 × 15-pin front sockets
LED rotating beacon with holder, activated via parking lights
Additional LED work light at rear, activated via reverse gear
# Floor
Steel chequer plate on gooseneck
Perforated steel low-loader deck with chequer plate in wheel well area
Removable steel covers above wheel arches
Perforated steel rear loading slope
# Side Walls
400 mm aluminium side boards on the gooseneck, removable, approx. 2,500 mm long
400 mm removable aluminium rear board on the gooseneck
# Loading Ramps
Pair of aluminium loading ramps, max. capacity 12,000 kg per pair, approx. 3,400 × 320 mm
Rear ramp storage compartment between the longitudinal beams
# Registration / Marking
Prepared for German registration
Single-line number plate holder
ECE R48 reflective contour markings (white sides, red rear)
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2006
196 在线广告
发送询价
电话 & 传真
+49 36482... 广告
您的广告已成功删除
发生错误
























































