自卸半挂车

Fliegl DHKA 390 - 50 m³

Customized Transport Solution
Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Further Information
Chassis, Saddle, and Tipper
Fine-grain steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins
Curved front end, patented
24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation
2 support wedges with holder
Underrun protection, foldable
Half-shell fenders
Integrated fender holder, surface designed to repel stones
With anti-spray flaps, only on the last axle
1 tarpaulin rod with bracket
2 towing hooks at the rear
Axles + Suspension
BPW disc brake axles with 430 mm disc diameter
Axle/chassis laser-measured to reduce tire wear and fuel consumption
Air suspension
1st axle: automatic lift axle, including forced lowering and starting assist
Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through
Braking System
2-line compressed air braking system, color-coded lines for easy servicing
Spring-loaded parking brake
2 fail-safe coupling heads at the front, without connecting line
EBS, electronic braking system with EBS socket at the front, without connecting cable
Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS!
With lifting and lowering valve
Vehicle - Driving Stability System
Wheels and Tires
385/65 R22.5, manufacturer's choice
Steel rims, factory silver
"TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on base tires).
Electrical System
24 Volt, multi-chamber lights, yellow LED lighting on the sides
Yellow LED lighting on the sides coupled with the turn signal "Flashing side lights"
2 white position lights at the front
2 white/red marker lights at the rear
2 x 7-pole fail-safe sockets at the front, without connecting cable
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw fitting, fixed part, NW 48 mm (without hose connection)
Operation hydraulically via truck auxiliary drive
Dump Body
Aluminum box dump body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with top edge profile to prevent spillage. Inside with ladder on the front wall (not in conjunction with Cramaro).
Shovel and broom holder on the outside on the front wall.
Greenline - conical and aerodynamic dump body shape
Membrane - rear wall
Rear wall with oscillating mounting with double-joint hinge and with 2-part door division 1/2 to 1/2, at the top with pivoting gantry, with one grain slide per door.
Rear wall with rubber seal. Note! Heat resistant up to max. 170°C!
Floor continuously 6 mm thick
Standing platform with ladder, connecting plate for air/electricity and brake with large space for optimal operation.
Roll cover, single-sided, for placement on the right side, with central locking on the left side
Iasdpsi Ri Ihjfx Ablou
Country of Registration / Signs
Germany
Type approval according to EC 2007/46
24/7 service hotline
Prepared for license plate holder, single-row
Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear
Paint Finish
Frame DB 7350 Novagrau
"10-year warranty against rust-through"

该广告为自动翻译，可能存在翻译错误。