带湿度的气候试验室

Feutron 3707/06 Temp. -40°C bis 150°C

Here we offer a Feutron climate test cell.
Feutron climate test cell
Temperature
Temperature range: -40...90°C
Climatic range (without heat load) 10...85°C
Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min.
Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min
Rate of change
Heating 2.0 on average K/min
Cooling 2,0 in average K/min
The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps.
(setpoint step change) can be realized
Drying
Air drying Condensation drying
Humidity
Humidification of air Steam humidification
Humidity range 10... 95 % r.h.
Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H.
Dew point range 8... 80,9 °C
Test room
Test room volume 7.0m³
Dimensions
Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm
Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm
Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm
Feed-through opening 2x in front side right ∅ 75 mm
Irradiation unit test room
Cut-out 4x in side panel left for SC 2500 850 x 700 mm each
Area to be irradiated when using SC 2500 1200 x 1200 mm
Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m²
Lighting 1xhalogen lamp 200W
Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled
Condenser: split condenser (outdoor installation winter control)
Refrigerant R507 /R23
Temperature control system
Cooling brine medium Tyfocor / water
Mixing ratio 50/50
Density of cooling brine 1,072 kg/dm³
Filling quantity approx. 80dm³
Pyranometer Temperature range -40... 150°C
Max. Radiation absorption 4000 W/m²
Spectral range (50% points) 305... 2800nm
Sensitivity (norminal) 7 µV/W/m²
Gkodpfeklv H Isx Af Ajc
Power supply Test cell
Electrical mains connection 400V, 3/N/PE, AC, 50Hz
Connection type fixed connection
Max. simultaneous power requirement approx. 32.0 kW
Supply line fuse 3 x 63, Char C (A)
Power supply SolarConstant
Electrical mains connection 400V, 3/N/PE, AC, 50Hz
Connection type
Max. simultaneous power requirement approx. 30.0 kW
Supply line fuse 3 x 63, Char C (A)
Outer dimensions of the test cell complete with: Genset room/switch cabinet
and control cabinet for SolarConstant 2500
Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm
/switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm
Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm
Mass of test cell, total approx. 2700 kg
Mass of condenser, empty 153 kg
Weight : 2700 Kg
Type: 3707/06
Condition: used / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
Further questions we can answer on the phone for you.

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。