作业平台半挂车

FAYMONVILLE Telemax Sattelauflieger - 3fach teleskopierbar

You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

Excerpt from the equipment list. Full specifications available on request.

LOAD AREA:
* Gooseneck, approx. 4,300 mm length, with central beam
* Load area in triple extendable version, approx. 9,300 mm total length
* On the central beams, a fixed welded support plate approx. 200 mm wide
* Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current load area length (except for the supply of the first and second locking positions)
* Technical fifth wheel load: 28,000 kg. For tractor units: 4 x 2, 6 x 2, and 6 x 4
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, all axles forced-steered hydromechanically, mounted on turntables
Bjdpfeyg T Hpsx Aggswh
* Technical axle load: 12,000 kg each
* Air suspension with lift and lower valve
* 275/70 R 22.5 3PMSF twin tires. Brand of our choice, load index 148/145M
* Steel front wall, approx. 800 mm high, certified according to EN12642 : 2016 XL. Maximum load capacity: 20,000 daN
* Connection strip for supply lines to the tractor unit approx. 600 mm below the lower edge of the outer frame profile
* Yellow-red pneumatic couplings at the front connection strip
* ASPÖCK UNIBOX at front connection strip with sockets: 24N, 24S & 15-pin. 24N according to ISO 1185, 24S according to ISO 3731, 15-pin according to ISO 12098
* 3 kW electro-hydraulic unit for hydraulic operations
* 4 pairs of recessed lashing rings in the outer frame of the gooseneck, fold outwards (LC 10,000 daN)
* 4 pairs of stake pockets in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm
* 1 stake pocket bar transversely mounted in the gooseneck floor, for plug-in stakes approx. 100 x 50 mm. 1 at the rear of the gooseneck
* 3.5-inch kingpin
* Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg
* On the gooseneck and load area: approx. 32 mm wooden floor embedded in ALU omega profiles
* On the large cross-section extension tube: one locking position approx. every 1,000 mm
* On the medium cross-section extension tube: one locking position approx. every 3,000 mm and at maximum extension
* On the small cross-section extension tube: one locking position approx. every 3,000 mm and at maximum extension
* This results in one locking possibility approx. every 1,000 mm
* 10 pairs of recessed lashing rings in the outer frame of the load area, fold outwards (LC 10,000 daN)
* 9 pairs of stake pockets in the outer frame of the load area, for plug-in stakes approx. 100 x 50 mm
* 2 transverse stake pocket bars mounted in the floor of the load area, for plug-in stakes approx. 100 x 50 mm
* 2 wheel chocks with holder under the load area
* Access ladder mounted on the right in the direction of travel
* Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit
* Last axle with air spring vent activated when parking brake is applied
* Under the gooseneck and at the rear crossmember left and right, one 7-pin socket each for warning panels
* One 7-pin socket at rear crossmember
* Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917)
* Cable for the electrical supply

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。