作业平台半挂车FAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
作业平台半挂车
FAYMONVILLE
MAX Trailer MAX410 Ballastauflieger
状况
全新
位置
Essen 

显示图片
显示地图
机器数据
价格和位置
- 卖方所在地:
- Heegstraße 6-8, 45356 Essen, 德国

拨打
技术细节
- 最大载重重量:
- 52,810 千克
- 总重量:
- 63,000 千克
- 车轴配置:
- 3 轴
- 总宽度:
- 2,540 毫米
- 设备:
- 防抱死制动系统 (ABS)
优惠详情
- 广告编号:
- A20429910
- 参考编号:
- 36358
- 更新:
- 最近更新时间为 04.11.2025
描述
You can find our complete range of immediately and soon available vehicles on our website.
Excerpt from the equipment list. Full specifications available on request.
Cargo area:
* Cargo area with approx. 30 mm thick hardwood floor
* 10 pairs of folding external lashing rings (LC 10,000 daN)
Landing legs:
* Hydraulic landing legs
TPMS:
* TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data.
Axles and suspension:
* BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables
* Air-suspended with lift and lower valve
* Axle toolkit
Tires:
* Tires 445/65 R 22.5 169 K
Electrical system:
Gedpfxexttc As Abnebi
* Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
* Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Brake system:
* Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit
Steel construction:
* Steel construction made of high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa)
Painting:
* Complete steel structure automatically shot-blasted after welding using a shot-blasting machine
* Secondary blasting with corundum for optimal adhesion of the coating system
* Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL
* Rear section metallized and painted in RAL 9010 Pure White
* Wheels in Silver Grey
* Paint structure tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax
Including accessories:
* Cargo area with approx. 30 mm thick hardwood floor
* 2-inch king pin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* Yellow-red air couplings on the galvanized front connection strip
* On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket
* Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit)
* Electro-hydraulic unit
* 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area
* Load manometer for determining axle loads including load diagram
* Lift axle on the front axle, controlled by TEBS E
* 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes
* One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel)
* 1 shunting coupling with reinforcement bolted to the rear cross member
* BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard
* 2 LED reversing lights mounted on the rear panel
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)
该广告为自动翻译,可能存在翻译错误。
Excerpt from the equipment list. Full specifications available on request.
Cargo area:
* Cargo area with approx. 30 mm thick hardwood floor
* 10 pairs of folding external lashing rings (LC 10,000 daN)
Landing legs:
* Hydraulic landing legs
TPMS:
* TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data.
Axles and suspension:
* BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables
* Air-suspended with lift and lower valve
* Axle toolkit
Tires:
* Tires 445/65 R 22.5 169 K
Electrical system:
Gedpfxexttc As Abnebi
* Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets
* Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Brake system:
* Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit
Steel construction:
* Steel construction made of high-strength fine-grain steels
* Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa)
Painting:
* Complete steel structure automatically shot-blasted after welding using a shot-blasting machine
* Secondary blasting with corundum for optimal adhesion of the coating system
* Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL
* Rear section metallized and painted in RAL 9010 Pure White
* Wheels in Silver Grey
* Paint structure tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax
Including accessories:
* Cargo area with approx. 30 mm thick hardwood floor
* 2-inch king pin
* One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high
* Yellow-red air couplings on the galvanized front connection strip
* On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket
* Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit)
* Electro-hydraulic unit
* 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area
* Load manometer for determining axle loads including load diagram
* Lift axle on the front axle, controlled by TEBS E
* 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes
* One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel)
* 1 shunting coupling with reinforcement bolted to the rear cross member
* BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard
* 2 LED reversing lights mounted on the rear panel
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum)
该广告为自动翻译,可能存在翻译错误。
这些广告您可能也感兴趣。
小广告
Langenhagen
9,277 km
变压器站
Bockenem-AREVA 630 Station 20kVUK1700-30 2005
Bockenem-AREVA 630 Station 20kVUK1700-30 2005
小广告
Groenlo
9,478 km
全地形起重机
DAFCF85 With HMF 85t/m Crane Dutch Registration, HMF
DAFCF85 With HMF 85t/m Crane Dutch Registration, HMF
小广告
Cloppenburg
9,352 km
france transfo 500 kVA 10/0,4 kVDyn05
小广告
Weißenhorn
9,479 km
托盘货架用钢丝网格 1米-1.2米
小广告
Aulnay-sous-Bois
9,913 km
双梁桥式起重机 40T DEMAG
DEMAG40T
DEMAG40T
小广告
Langenhagen
9,277 km
变压器
Trafostation 630 kVA 20kV Gräper/SGBGBU/DOTEL 2007
Trafostation 630 kVA 20kV Gräper/SGBGBU/DOTEL 2007
小广告
Schiedam
9,610 km
起重卡车
Mercedes-BenzACTROS 4141 / FAUN HK60 MOBILE CRANE WITH JIB
Mercedes-BenzACTROS 4141 / FAUN HK60 MOBILE CRANE WITH JIB
小广告
Dautphetal
9,435 km
大厅建设
Halle zur VermietungProduktions- und Montagehalle 850m²
Halle zur VermietungProduktions- und Montagehalle 850m²
小广告
Nordhausen
9,262 km
近乎全新 ABUS 厂房起重机 起重机 crane
ABUS Laufkatze KranGM 3063 6,3 to.
ABUS Laufkatze KranGM 3063 6,3 to.
小广告
Wielka Nieszawka
8,722 km
桥式起重机 - 桥式起重机
WNM Sp. Z O.O.
WNM Sp. Z O.O.
您的广告已成功删除
发生错误









































































































