低平台半挂车

FAYMONVILLE MAX Trailer MAX110 Semi-Tieflader

You can find our entire inventory of immediately and short-term available vehicles on our website.

Excerpt from the features. Complete list of features available on request.

Gooseneck:
* Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Extendable loading platform:
* Extendable loading platform with rear bevel approx. 1,000 mm x 8°
* 5 pairs of folding lashing rings on the outside (LC 5,000 daN)
* 3 pairs of folding lashing rings on the outside (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tie-down straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, over axles with checker plate

Axles:
* BPW axles and suspension
* 1st axle fixed, all other axles hydro-mechanically forced-steered
* Technical axle load: 12,000 kg each
* Air suspension with lifting and lowering valve
* Axle tools

Tires:
* 245/70 R 17.5 3PMSF tires, load index (146/146 F)
* Brand of our choice
* TPMS tire pressure monitoring system according to ECE R 141
* Data transmission to the tractor unit is via standardized EBS interface per ISO 11992
* For correct display, the tractor unit must be able to transmit and display this data

Landing legs:
* JOST landing legs (mechanical), 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)

Brake system:
* Wabco braking system in accordance with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit
Hsdjxbmpfepfx Af Asfn

Paintwork:
* Complete steel construction is automatically blasted after welding by shot blast machine
* Second blasting with corundum for optimal coating adhesion
* Final paintwork: 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red per RAL system 841GL
* Rims in silver gray
* Rear panel metallized and painted in RAL 9010 (pure white)
* No metallic paint available
* Paint system tested by salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax

Steel construction:
* Steel structure made from high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)

Electrical system:
* Electrical system according to EU regulations
* Lighting 24 volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash in sync with the indicators
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO.
* 24N ISO-1185 24S ISO-3731 15-pin ISO-12098

Includes the following additional equipment:
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* At the galvanized front connection strip, yellow-red air couplings
* Electro-hydraulic unit
* Remote steering control, operated from both front and rear via cable remote with push buttons, with single-track axle control (without installation in the tractor unit)
* Galvanized folding supports under the rear ramp of the loading platform
* 1 pair of recessed lashing rings along the main longitudinal beam at the rear ramp (LC 10,000 daN)
* On the gooseneck, removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H)
* The rear galvanized socket stakes are removable. (Upper body length approx. 2,560 mm)
* 1 galvanized toolbox, integrated into the sloped gooseneck
* 3 pairs of WADER container pockets in the loading platform for one 20' (30?) or one

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。