Trailer with working platform

ES-GE Tandemanhänger - Rungen - CV

You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website.

Excerpt from the equipment:
Complete equipment available upon request.

Chassis
* Steel welded structure made of welded longitudinal beams and pierced Z-shaped cross members
* Narrow cross member spacing for high ground load capacity
* Ramp storage between the longitudinal beams behind the axle assembly
* Two pockets below the loading platform for one ramp each
* With locking plate in the head frame at the rear

Under-run protection
* Compliant with EC regulations

Front bolster
* Bolsters with single-sided operation
* Rear support: Two adjustable drop-down supports

Axles
* 2 x 10 t air suspension axle assembly
* Manufacturer: SAF
* Drum brakes approx. 300x200mm
* Center-mounted for twin tires, ABS
* Total travel of the air suspension approx. 200mm
* Of which lifting approx. 140mm and lowering approx. 60mm
* Control via hand lever with detent function

Tires
* 8x, 235/75 R17.5
* Manufacturer of our choice
* Mounted on rim 6.75X17.5 with offset

Splash guards
* Made of PVC in front of and behind the axles, compliant with EC regulations

Load securing
* One hole for lashing straps in the outer frame approximately every 150 mm
* Tensile force approx. 2.5 t
* 6 pairs of folding lashing rings evenly distributed, tensile force approx. 8 t
* Recess pockets for lashing bars 80/50
Bwjdpfx Aoz Dmnkel Ijw
* 3 pairs of recess pockets in the outer frame, evenly distributed.

Braking system
* Air brake system compliant with EC regulations with EBS
* Two spiral hoses as connection to the towing vehicle with coupling head red/yellow
* Spring brake acting on one axle.

Floor
* Approx. 28 mm Z-shaped hardwood floor recessed in the outer frame.

Lighting system
* Lighting system compliant with EC regulations, 24 Volt
* Multi-chamber rear lights
* License plate lights
* Side marker lights and position lights at the rear
* Connection plate on the left on the drawbar, incl. connection cable with 15-pin and 2 x 7-pin plugs.

Painting
* Chassis blasted, cleaned and hot-dip galvanized with state-of-the-art technology.
* Superstructure parts cleaned, primed and hot-dip galvanized
* Chassis: Hot-dip galvanized + RAL color of choice
* Hubs: KTL black
* Under-run protection: RAL 9010 Pure White
* Rims: RAL 9006 Silver
* Attached parts: galvanized / KTL
* Black contour marking: acc. to EC, yellow on the side and rear (with ES-GE logo)

Incl. accessories
* Rear extension by approx. 800 mm incl. under-run protection
* Extendable loading platform
* Load capacity approx. 2 t, locking every approx. 200 mm
* Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm
* With screwed drawbar eye approx. 50 mm acc. to DIN 74053
* 4 rows of recess pockets transverse to the loading area, evenly distributed
* 12 pieces of lashing bars made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locking for 1x20? container, container locking 1 x 20? extendable to approx. 2,820 mm, acc. to ISO 1496, EN 284 or EN 452
* 1 pair of aluminum ramps, load capacity per pair approx. 9,000 kg
* 4 x stainless steel toolboxes between or behind the axles
* 2 wheel chocks with holder
* Rotating beacon pluggable at the rear
* Delivery of a 40-unit towing device (GG max. 13,500 kg)

该广告为自动翻译，可能存在翻译错误。