作业平台半挂车

ES-GE 3-Achs Sattelanhänger - Bordwände + CV

You can find our entire inventory of vehicles, including those available immediately or at short notice, on our website.

Extract from the equipment list. Full equipment details available on request.

Chassis:
* Welded construction using high-quality steel profiles with punched-through cross-members, designed for high point loads

Coupling device:
* 2-inch kingpin

Landing gear:
* 2 x 12 t landing legs with compensating foot and single-side operation on the right front side

Axles:
* 3 x 9 t air suspension axle units
* Disc brakes
* SAF brand, with disc brake approx. 430 x 45 mm
* ABS
* Centrally positioned wheel mounting, 10-hole with ET 120
* Total pneumatic suspension lift approx. 200 mm, of which approx. 140 mm raising and 60 mm lowering, controlled via rotary lever valve with detent
Guedpfx Afewx Db Ao Ajh

Brake system:
* Dual-circuit air pressure braking system according to EC standards with EBS and RSS, automatic load-dependent control
* Spring actuators as parking brake
* Mistake-proofed coupling heads permanently mounted to the front cross member, with no connecting line to the towing vehicle

Tyres:
* 6 units, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice

Mudguards:
* According to EC, PVC mudguards in front of and behind the axle unit

Spare wheel holder:
* 1 double basket incl. mounting kit for one spare wheel with ET 120

Load securing:
* 9 pairs of folding lashing rings, evenly distributed, pulling force approx. 8.0 t
* 8 pairs of folding lashing rings, evenly distributed, pulling force approx. 2.5 t
* Outer frame with holes for tension straps approx. every 500 mm

Front wall:
* Reinforced steel construction, fixed
* Interior lining approx. 9 mm birch plywood (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor recessed into outer frame

Lighting system:
* EC compliant, 24 volts with multi-chamber lights
* LED side marker lights
* LED position lights white at front
* LED outline lights at rear
* Number plate lights
* 1x 15-pin and 2x 7-pin connectors on the front cross member

Equipment:
* ECE 70 warning board
* Bracket for rotating beacon (without beacon)

Paintwork:
* Chassis and front wall sandblasted, primed and painted in single color
* Chassis: RAL 3002 (carmine red)
* Sideboards: Anodized
* Sideboard stanchions: RAL 3002 (carmine red)
* SSV: Aluminum anodized
* Hubs: KTL coated
* Rear underrun guard: white (RAL 9010)
* Attachments: galvanized/KTL black
* Rims: silver

Accessories:
* First axle liftable, with fully automatic load-dependent lift control
* 10 pairs of stanchion pockets in outer frame, evenly distributed
* 4 rows of stanchion pockets across the loading deck
* 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm
* Magazine for 20 plug-in stanchions mounted inside front wall
* Sideboards: 5 x 25er sideboards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions
* Sideboard and stanchion magazine: insertion rails for sideboards and stanchions left and right under the chassis
* Container locks for 1 x 40' and 2 x 20' containers at rear flush, container locks for 1 x 20' container in center position
* Work light on lamp bracket
* 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm

* Air suspension

Safety: ABS
* EBS
* Disc brakes

Extras: Rental possible

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。