立式单主轴车削中心

EMAG VL 400 (Siemens)

Vertical Single-Spindle Turning Center Vertical Lathe
Manufacturer: EMAG
Model: VL 400 (Siemens)
Year of manufacture: 2021
Operating hours: approx. 1,848

Turret base unit and slide unit Y-axis

HP turret drive unit for driven tools (C442) with internal coolant supply to the tool
Max. speed: 6,000 rpm
Corner speed: 3,200 rpm
Tool carrier unit for driven tools: 12 x BMT75

Rotary workpiece transport system, O-version
Drag frame system for 10 workpieces
Workpiece height (incl. workpiece pallet): max. 300 mm
Workpiece weight: max. 60 kg

Set (10 pcs.) drag frames for O-belt
For workpiece diameter: 150 - 400 mm

Blow-off of workpiece and clamping device (Pick-Up)

Coolant supply: 15 bar
Coolant pump delivery rate approx. 80 l/min at 15 bar.
Cooling unit (6.5 kW, water - air)
A cooling unit (with dual-circuit technology) regulates the machine's thermal management.
Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C).

Coolant double filter, manually switchable
Filter fineness 100 μm, with electrical and mechanical contamination indicator
Isdevq Iwyjpfx Afuotb

Chip conveyor
Hinged belt version: discharge to the rear
Chip discharge height 1,100 mm. (with integrated coolant tank, capacity approx. 500 l)

Emulsion mist extraction: extraction capacity approx. 800 m3/h
Rinsing gun

Workpiece measurement with probe
Probe blow-off
Tool life monitoring (sister tool management)

Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i)

3-color signal light

Axial boring-milling head – BMT75 CC
5x angular boring-milling head 90° - BMT75 CC (i=1:1)
Set of tools for OP10 + OP20

Hydraulic power chuck cylinder size 150 - with 1 media passage
Max. clamping force 10,850 daN at 70 bar

Coolant through spindle
Programmable clamping pressure adjustment

3-jaw power chuck KNCS-N 500-155 quick-change
max. = 2,200 rpm (reference speed according to DIN 6386)
Set of hard base jaws
Set of soft top jaws

Attachments for KNCS-N 500-155
Flushing nozzle in chuck bore

Additional tool holders with tools:
1x 8.BMT25VL8IKX50 Finishing External
1x 8.BMT25VL8IKX50 Roughing External
1x 60.7516VL8IKDI15 Engraving tool
1x 60.7516VL8IKDI15 Thread tapping holder
1x 40.75V5KRVL8IKD Face mill 50mm
3x 80.75V5VL8IKD Boring bar holder
2x 27.V520HYDL26 Drill diameter 20mm
1x 42.V522L08Ik Drill diameter 22mm
1x 27.V514WNL31 Drill diameter 14mm

Software package
Operating instructions / maintenance manual
161225ä

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。