压缩空气吸附式干燥机Donaldson Filtration
HRS 1000 Ultrafilter
压缩空气吸附式干燥机
Donaldson Filtration
HRS 1000 Ultrafilter
製造年份
2014
狀況
二手
位置
Radeberg 

顯示圖片
显示地图
机器数据
价格和位置
- 位置:
- Wachauer Straße 13 OT Liegau-Augustusbad, 01454 Radeberg, DE
撥打
技术细节
- 体积流量:
- 1,000 立方米/小时
- 总宽度:
- 1,020 毫米
- 总长度:
- 1,680 毫米
- 总高度:
- 2,460 毫米
- 总重量:
- 1,540 千克
- 工作压力:
- 10 横杆
- 输入电压:
- 400 V
- 功率:
- 14.2 千瓦 (19.31 马力)
优惠详情
- 產品ID:
- A15425848
- 最後更新:
- 於 07.12.2024
描述
1 heat-regenerating compressed air adsorption dryer.
The dryer was in use from 2014 to 2017. The system has been out of operation since 2017.
The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW.
Manufacturer: Donaldson Filtration Deutschland GmbH
Type: HRS 1000
Year of construction: 2014
Volume flow at 7 bar: 1000 m³/h (16.66 m³/min)
Connection: DN 80
Installed power: 14.2 kW
Dimensions length / width / height: 1680mm / 1020mm / 2460mm
Weight: 1540 kg
Desiccant bottom (20 cm): 3 mm activated aluminum oxide
Hjdpfx Afsr A El Ej Asfn
Desiccant middle (40 cm): 2 mm activated aluminum oxide
Top desiccant (rest up to the top) silica gel as a ball.
The desiccant is already disassembled and immediately available.
The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags.
The desiccant is still in a usable condition. It is not oily or soiled.
There is the possibility of external re-drying.
The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared.
"Loose adhesion on the lower part of the dished end" (pictures to follow)
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
The dryer was in use from 2014 to 2017. The system has been out of operation since 2017.
The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW.
Manufacturer: Donaldson Filtration Deutschland GmbH
Type: HRS 1000
Year of construction: 2014
Volume flow at 7 bar: 1000 m³/h (16.66 m³/min)
Connection: DN 80
Installed power: 14.2 kW
Dimensions length / width / height: 1680mm / 1020mm / 2460mm
Weight: 1540 kg
Desiccant bottom (20 cm): 3 mm activated aluminum oxide
Hjdpfx Afsr A El Ej Asfn
Desiccant middle (40 cm): 2 mm activated aluminum oxide
Top desiccant (rest up to the top) silica gel as a ball.
The desiccant is already disassembled and immediately available.
The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags.
The desiccant is still in a usable condition. It is not oily or soiled.
There is the possibility of external re-drying.
The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared.
"Loose adhesion on the lower part of the dished end" (pictures to follow)
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误