通用加工中心DMG
DMU 60 P
技术细节
- X轴行程:
- 600 毫米
- Y轴行程:
- 700 毫米
- Z轴移动距离:
- 600 毫米
- 最大转速:
- 12,000 转/分
提供
- 位置:
- 德国
– 距离：约 9,436 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€1,000.00 (约束性)
免费
描述
TECHNICAL DETAILS
Torque available at the spindle: see diagram in PDF
Motor power at 100% duty cycle: see diagram in PDF
Motor power at 40% duty cycle: see diagram in PDF
Spindle speed infinitely programmable: 20-12,000 rpm
Speed in setup mode: 20-800 rpm
Magazine positions: 30 units
Measuring System
Resolution X, Y, Z axis: 0.001 mm
Input increment X, Y, Z axis: 0.001 mm
Position tolerance X, Y, Z axis: 0.010 mm
Feed Drive
Motors: AC braking motors for X, Y, Z axes
Feed rate X, Y, Z axis steplessly programmable: 20-15,000 mm/min
Rapid traverse X, Y, Z axis: 60 m/min
Setup mode X, Y, Z axis: 20-2,000 mm/min
NC Swivel Rotary Table
Clamping surface: Ø630 mm
T-slot spacing: 63 mm
Number of T-slots / size: 9 / 14 H7
Center bore: Ø50H6 mm
Holding torque at 100% duty cycle A-axis: 3,866 Nm
Holding torque at 100% duty cycle C-axis: 6,008 Nm
Max. rotation of the table top A-axis: 7.3 rpm
Max. rotation of the table top C-axis: 7.0 rpm
Swivel range A-axis: ±45 / 30°
Rotational range C-axis: n x 360°
Tool holder: SK40
Operating Hours
Power-on hours: 35,099 h
Spindle hours: 9,848 h
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A19517476
- 參考編號:
- AUC-2507028
- 最後更新:
- 於 21.07.2025
- 独家优惠:
- 仅在拍卖中提供
参观
德国 DMGDMU60 P
Osnabrück ZayerGMCU 6000-AR
Burgoberbach DMG MORIDMU 60 P
Oelde DECKEL MAHODMC 100 U duoBLOCK
Kirchen (Sieg) HAASEC-1600
Grüsch DECKEL MAHODMC 80 FD
Flémalle +GF+ Mikron CharmilleMikron VCE 600 pro
Auw bei Prüm DMG MORIDMU 80P duoblock
Nördlingen Deckel MahoDMU200P
Sonnenbühl DMU80 P hi-dyn
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。