数控车铣中心DMG MORI
NTX 2500/1500
机器数据
技术细节
- 车削长度:
- 1,530 毫米
- 车削直径:
- 670 毫米
- 主轴速度（最大）:
- 12,000 转/分
- X轴行程:
- 675 毫米
- Y轴行程:
- 300 毫米
- Z轴移动距离:
- 40 毫米
- 最大转速:
- 4,000 转/分
- 刀库刀位数量:
- 76
提供
- 位置:
- Bayern, 德国
– 距离：约 9,338 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
免费
免费
描述
Simultaneous 5-axis machining with direct drive (DDM) in the B-axis
HIGHLIGHTS
Milling spindle: compactMASTER with shortest length of 350 mm
Machining option: 6-sided complete machining thanks to powerful counter spindle
TECHNICAL DETAILS
X1-axis travel: 675 mm (+550 / -125 mm)
Y1-axis travel: 300 mm (+/-150 mm)
Y2-axis travel: +/-40 mm
editing area
Maximum machining area: Ø 670 mm x 1,530 mm
steering
Control type: FANUC F31iB5 with CELOS
Operation: CELOS - ERGOline Touch
spindle
Main spindle: standard spindle Ø 91 mm, 4,000 rpm
Counter spindle: standard spindle Ø 91 mm, 4,000 rpm
chuck
Chuck main spindle: hollow chuck 10", Ø 254 mm
Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821
Protection: Double foot switch with protective cover for main and counter spindle
Path control: Automatic path control of the clamping cylinder for the main spindle and counter spindle
turning-milling spindle
Spindle (B-axis): Standard speed 12,000 rpm (FANUC)
Tool holder: Capto C6
Positioning: B-axis with 0.0001° accuracy for 5-axis machining
tool turret
Type: Revolver 2 with tailstock function
Equipment: 10-station turret for screw-mounted tool holders
Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC)
tool magazine
Capacity: 76 tools
Tool holder: CAPTO C6
measuring and monitoring
Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard)
Position measuring system: Direct position measuring system in the X, Y and Z axes of the turning-milling spindle
Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600
automation
Signal lamp: 4-color (red, yellow, green, blue)
Interface: For bar feeder (LNS, IRCO, IEMCA, Edge Technologies, Multiple)
MACHINE DETAILS
Machine dimensions (L x W): 5,825 x 2,830 mm
cooling media and chip disposal
Chip conveyor: discharge right, hinged belt + drum filter
Coolant: Use of water-soluble cooling lubricants (emulsion)
Pressure: High-pressure coolant system with 70 bar
Coolant supply: Through the spindle for tool spindle and lower turret
Filter system: Knoll/Interlit
compressed air system
Blow-off system: For chucks on main and counter spindle
oil mist system
Oil mist separator: suction opening Ø 200 mm, AFS 1600
filter and cooling system
Filter system: INTERLIT TMF300/980 compact filter system, 70 bar
Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI)
Cooler: INTERLIT side cooler, 15 kW
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A18348571
- 參考編號:
- AUC-2410140
- 最後更新:
- 於 28.01.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。