数控车铣中心DMG Mori
NLX 2500 Y | 700
技术细节
- 主轴速度（最大）:
- 10,000 转/分
- Y轴行程:
- 200 毫米
- 最大转速:
- 4,000 转/分
- 棒材直径（最大）:
- 80 毫米
- 中心距:
- 700 毫米
提供
- 位置:
- Berlin, 德国
– 距离：约 9,046 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€3,500.00 (约束性)
免费
描述
Condition: Ball screw drives on X, Y, and Z axes are new + major maintenance package carried out approx. one year ago (machine has not been in operation since)!
TECHNICAL DETAILS
Distance between centers: 700 mm
Spindle speed range: 1 - 4,000 rpm
Tool spindle speed: 10,000 rpm
Bar diameter: 80 mm
Tailstock quill taper: MT5, revolving
without center
Turret: 12 stations, bolt-on turret
Overhang for driven tools: ±100 mm
Assemblies: Integrated MK4 bearing for center
Chip and cooling system
Scraper conveyor: with magnetic separator, discharge height approx. 1,000 mm
Cooling system: high pressure 5 bar, pump 800 W, flow rate 20 l/min
Coolant shower at the chuck, incl. high-performance pump
Compressed air blow-off system for tool holders
Compressed air blow-off system for tailstock center
In-line filter for cooling system
MACHINE DETAILS
Control: M730UM, CELOS - ERGOline Touch
Total power consumption: 18.5 / 18.5 / 15 kW (25% DC / 50% DC / continuous)
Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous)
EQUIPMENT
Interface for oil mist separator (diameter: 150 mm)
Signal light red, yellow, green, blue
EtherNet/IP interface for automation
Robot interface for portal robot DMG Mori Seiki
Transformer: 45 kVA, three-phase autotransformer
X-axis direction ISO
Note: The machine is supplied without chuck, tool presetting device, or clamping equipment.
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A21719118
- 参考编号:
- AUC-2604060
- 更新:
- 最近更新时间为 23.04.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Trittau DMG MORINLX 2500 Y | 700
Iași ZeissDURAMAX 5/5/5
Borken ZollerV 520 Magnum
Herzogenrath DMG MORINLX 2500/700
波兰 AGIE CHARMILLESFI 640 CC
Wishaw SodickAM 35
Uppsala Extrude HoneCOOLPULSE 1000
Buttlar LecoTC400C
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。