加工中心 - 通用

DMG MORI CMX 70 U mit Robo2Go

x-travel 750 mm
y-travel 600 mm
z-travel 520 mm
B-axis (table) - 10°/+95° Grad
c-axis 360° Grad
table surface area Ø 800 x 620 mm
control Heidenhain TNC 620
spindle turning speed - stepless 20 - 15.000 U/min
power capacity - milling spindle 20 / 14,5 kW
max. torque on the milling spindle 121 / 84 Nm
rapid traverse 30 m/min
tool change unit 60 Werkzeuge
tool taper SK40
table load 350 max. kg
total power requirement 35 kVA
weight of the machine ca. 11 t
dimensions of the machine ca. 6,5 x 4,5x 3,0 m
Five-sided machining center with ROBO2GO Milling robot in excellent condition. The ideal machine for minimally staffed shifts, right down to single-part production! (Can also be used as a stand-alone machine)
The machine has only 2,850 spindle hours and is equipped as follows:


* Heidenhain TNC 620 3D control with 19" screen
* electronic handwheel
* direct position measurement system (X, Y, Z)
* Universal milling head with controlled B-axis
* SK40 motor spindle, 15,000 rpm, 20 kW
* Tool magazine (carousel), 60 positions
* HEIDENHAIN TS 460 touch probe for workpiece measurement with optical
signal transmission
* Tool measurement in the work area: Blum Laser NT-Hybrid
* BLUM laser probe for measuring tool length and diameter
* Pneumatic control system for the clamping device, mounted on the machine table
* SCHUNK KSP plus 160 pneumatic vise
* Blowing air can be activated through the center of the spindle
* Electronic handwheel
* through the spindle coolant (40 bar) with paper-tape filter system
* Chip conveyor

_____

* Flexible workpiece loading and unloading system with a 6-axis industrial robot
- Interchangeable workpiece magazine, including workpiece trays
- Max. 42 parts up to 100 x 100 mm
- Max. 9 parts up to 200 x 200 mm
- Max. tray load: 700 kg
- Max. robot payload: 25 kg


* 2-jaw gripper for rectangular workpieces
- Gripping range with jaw adjustment system: 20–195 mm
- Min. workpiece height: 20 mm
- Gripper stroke: 6 mm per jaw


Godpfx Aj Ai Ucajc Djbw



* Drawer storage:
- For increased capacity and loading/unloading of workpieces during active production time
Includes 15 touchscreen
- Each drawer can be loaded with different jobs via the software
- Number of drawers: 3 (+ 2 optional)
- Max. workpiece height with 3 drawers: 250 mm
- Max. workpiece height with 5 drawers: 100 mm
- Max. load per drawer: 300 kg
- Includes safety fence with light curtain
- Inlay for up to 22 parts, up to 100 x 100 mm, for drawer storage

The machine can be inspected under power!