数控万能车床DMG MORI
CLX 550 V4
机器数据
技术细节
- 车削长度:
- 1,450 毫米
- 车削直径:
- 425 毫米
- 主轴速度（最大）:
- 3,250 转/分
- X轴行程:
- 307 毫米
- Y轴行程:
- 60 毫米
- Z轴移动距离:
- 1,240 毫米
- 控制器型号:
- DMG MORI SLIMline® Multi-Touch Steuerung
- 设备:
- 文档 / 手册
提供
- 位置:
- Baden-Württemberg, 德国
– 距离：约 9,518 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€3,000.00 (约束性)
免费
描述
2-axis universal lathe with C-axis and Y-axis and driven tools
TECHNICAL DETAILS
Control: Siemens SLIMline multi-touch
Swing diameter over bed: 700 mm
Swing diameter over slide: 370 mm
Max. turning diameter: 425 mm
Recommended turning diameter: 320 mm
X-axis : 307.5 mm
Y-axis : ±60 mm
Z1 axis : 1240 mm
Spindle distance between main and counter spindle : 1450 mm
main spindle
Spindletype: SMW BB-D 255/A2-8"
spindle nose: A2-8"
Max. speed : 3,250 rpm
clamping diameter: 255 mm
Drive power (40/100%): 33 / 22 kW
Torque (40/100%): 630 / 420 Nm
revolver
Number of tools : 12
Number of driven tools: 12
Mounting diameter: 40 mm
Tool holder: VDI 40
Number of BT tool positions: 6
Index time 30°: 0.46 s
Speed: 4,000 rpm
Power: 5.44 kW
Torque: 20 Nm
tailstock
Type: hydraulic
Travel: 1,200 mm
Force: 12 kN
Position accuracy: 0.2 mm
Centering point size: MK 5
Rapid traverse: 4 m/min
rapid traverse & accuracy
Rapid traverse X/Z axis : 30 m/min
Rapid traverse Y-axis : 22.5 m/min
Accuracy X / Y / Z: 10 µm
Accuracy C: 10 arc seconds
MACHINE DETAILS
Connected load: 60 kVA
Operating hours: 2,822 h
Spindle hours: 537 h
hydraulics
Tank: 17 l
Pressure: 55 bar
cooling
Chip conveyor: 245 l
Pump power: 0.85 kW
Pump flow: 20 l/min
EQUIPMENT
- Through hole: D 82 mm
- chip conveyor
- Hydraulic hollow clamping cylinder system for up to Ø80 mm bars
- Hydraulic tailstock with pedal control
- Electronic handwheel
- Set with hard and soft jaws
- collets
- Manual tool measuring probe
- DMG Mori Io Tconnector
- documentation
Machine has slight transport damage on the left side panel (see pictures)
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A18605421
- 參考編號:
- AUC-2502137
- 最後更新:
- 於 28.02.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。