数控车铣中心DMG GILDEMEISTER
TWIN 102
机器数据
- 机器名称:
- 数控车铣中心
- 制造商:
- DMG GILDEMEISTER
- 型号:
- TWIN 102
- 机器编号:
- 07400003691
- 出厂年份:
- 2007
- 状况:
- 未检测（已使用）
- 功能性:
- 未经检验
- 运行小时数:
- 43,558 h
技术细节
- 车削直径:
- 120 毫米
- 主轴速度（最大）:
- 5,000 转/分
- 主轴通孔:
- 118 毫米
- 控制器型号:
- SIEMENS SINUMERIK 840 D POWERLINE
- 主轴间距:
- 900 毫米
提供
- 位置:
- Baden-Württemberg, 德国
– 距离：约 9,478 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€2,000.00 (约束性)
免费
描述
No minimum price – guaranteed sale to the highest bidder!
Placing a bid obligates the buyer to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026!
TECHNICAL DETAILS
Max. main spindle speed: 5,000 rpm
Max. sub-spindle speed: 3,200 rpm
Swing diameter: 270 mm
Turning diameter: 120 mm
Max. bar diameter: 100/104 mm
Spindle bore diameter: 118 mm
Spindle distance: 900 mm
X1-axis travel: 290 mm
Z1-axis travel: 650 mm
X2-axis travel: 180 mm
Z2-axis travel: 650 mm
Y1-axis travel: ±40 mm
Z3-axis travel: 670 mm
X3-axis travel: 175 mm
Rapid traverse speed X-/Z-axis: 30 m/min
Rapid traverse speed Y-axis: 15 m/min
Number of tool turrets: 2
Number of tools per turret: 12
All tool stations driven
MACHINE DETAILS
CNC control: SIEMENS SINUMERIK 840 D POWERLINE
Dimensions & Weight
Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm
Machine weight: 11,000 kg
Operating hours: 88,040 h
Spindle hours: 43,558 h
EQUIPMENT
Chip conveyor
Foot switch
Note:
The machine has the following defects:
The B-axis is defective (located on turret 1)
The guideways and drives show age-related wear
The X2-axis (guide rails) moves slightly out of alignment by about 0.03 mm (re-measurement required)
Axis reference setting in the control unit is not functioning
The hydraulic pump was replaced by a spare after a failure and is now set up as a separa
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A21322682
- 参考编号:
- AUC-2602281
- 更新:
- 最近更新时间为 25.02.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Baden-Württemberg CHIRONMILL 800
Baden-Württemberg ZEMAG-800 PLUS
Baden-Württemberg DMG GILDEMEISTERGMX 250 LINEAR
Baden-Württemberg EMMEGITWIN ELECTRA SUN TU/6
Baden-Württemberg HEIDENREICH & HARBECKHAMBURG 540
Baden-Württemberg INDEXG 300
Baden-Württemberg STAMAMC 526
Baden-Württemberg EMMEGICOMBI 5 ASSI STAR TU/6
Baden-Württemberg DECKEL MAHODMU 60 P Hi-dyn
Baden-Württemberg GELBER-BIEGERERB 42-2000
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。