优化横切锯

DIMTER OptiCut C 700

Undercut cross-cut saw with continuously adjustable pneumatic cutting feed located at the front of the machine. Pneumatically controlled workpiece clamping device (also serves as a safety guard). Well-protected pneumatic units mounted within the compact machine body, with the maintenance unit mounted externally on the machine base frame. Extra-flat special circular saw motor for increased cutting height. Cut initiation via two-hand control with safety shield. The saw kerf is positioned on the right side with an inclined opening to allow cut-offs and waste pieces to fall freely.
Safety Standards: CE compliant (in combination with roller tables), BG dust-tested, Type-tested, Electrical control cabinet integrated into the machine stand, Emergency stop device

Processable Timber Dimensions
Saw Unit
• Saw blade diameter: Ø 550 mm
• Carbide saw blade, Z = 60 teeth, WZ20°
• Saw blade bore: 80 mm
Nominal Cross-Sections (without board curvature)
• Max. 750 × 50 mm
Kljdpfezki Uiex Abijw
• Or 710 × 75 mm
• Or 660 × 100 mm
• Or 570 × 125 mm
• Or 450 × 150 mm
• Or 260 × 175 mm
Permissible timber curvature in all directions: max. 3 mm per meter of length, or max. 10 mm over the entire length.
• Minimum end length: approx. 10 mm
• Wood species: softwood / hardwood / wood-based materials
• Working height: approx. 850 mm
Equipment and Technical Data
• Powerful saw motor: 5.5 kW
• Saw kerf on the right-hand side
• Pneumatically lowered safety shield, pivoting away for easier access to the cutting area
• Operating voltage: 400 V / 50 Hz
Pneumatic and Extraction Requirements
• Minimum air pressure: 6 bar
• Extraction air velocity: approx. 30 m/s
Extraction Connections
• Lower housing outlet: 120 mm
• Upper guard outlet: 120 mm
• Extraction volume: approx. 2,600 m³/h
• Weight: approx. 500 kg
Specifications are provided for information only.

This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.