用于铣床的键槽刨头，刨头，可替代立式铣头安装，铣头

DECKEL FP 1

Keyway milling head, head for DECKEL milling machine, type FP 1
Factory number: 21948
Dovetail width: approx. 74 - 88 mm
Dovetail height: approx. 14.5 mm
Dovetail length: 285 mm
Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm
Stroke size: max. 80 mm
Stroke rate: max. 475 double strokes/min.
Tool holder: 4-sided, 16 x 16 mm with clamping plate
- Stroke size adjustable via eccentric adjustment
- Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head)
- This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head
(Mounting in place of the vertical milling head)
- Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle
- Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35°
- Small breakout point on the housing
Weight: 28.5 kg
Nlodpfx Aeznn Hrjc Deg

DECKEL FP1 has a pressure angle of 15° on the drive wheel.
DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

该广告为自动翻译，可能存在翻译错误。