立式加工中心

DAHLIH MCV-860 mit RoboJob MA 25

Stock machine "NEW" – available at short notice! (Subject to prior sale)

Control: Fanuc 0i-MF Plus, 10.4"
with Manual Guide i & 2 MB NC memory
LOOK-AHEAD function, 400 blocks

Machine Table:
Table size: 950 x 550 mm
Load capacity: 800 kg
T-slot width: 18 mm
Number of T-slots: 3
Distance between T-slots: 150 mm

Travel axes:
Travel X/Y/Z: 860/550/550 mm
Spindle nose to table surface: 150 – 700 mm

Linear guides & speeds:
Ball linear guides in X/Y axes
Roller linear guide in Z axis
Rapid traverse X/Y/Z: 40/40/30 m/min
Feedrate during milling: 0 – 10,000 mm/min
Smallest increment: 0.001 mm

Tool magazine (CAM-Type) / changer:
Number of magazine pockets: 30
System: random access
Max. tool diameter: Ø 75 mm
Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm)
Max. tool length: 300 mm
Max. tool weight: 7 kg

Spindle:
Spindle taper: SK-40
Drive power (30min/cont.): 18.5/11 kW
15,000 rpm direct-drive spindle
Spindle oil cooler

Coolant, chip, and compressed air management:
Coolant system incl. 300 liter tank and pumps
External coolant around spindle
Chip augers right and left in machine bed
Compressed air nozzle at spindle (M32/M33)
Compressed air through spindle (M38/M39)
Compressed air and coolant gun

Other features:
Swiveling operator panel
Electronic handwheel (wired)
Central lubrication oil/air
Full enclosure
Work light
Heat exchanger at control cabinet
Auto power-off function
Hand tool set
Signal lamp
Transformer 400 VAC, 50 Hz
CE declaration of conformity according to European directives

Electrical and pneumatic requirements:
Electrical connection: 36 kVA
Required pneumatic input pressure: 6 bar

Dimensions:
Machine size: W2,260 x D2,900 x H2,775 mm
Required installation area: W3,160 x D3,000 x H3,000 mm
(incl. chip conveyor ejection to the left)
Machine weight: approx. 5,400 kg (net)

Available special equipment:

Spindle:
- Direct-driven spindle SK-40, 15,000 rpm
- Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor)

Tool magazine / changer:
- Drum-type tool magazine with 30 pockets, DIN69871, SK-40

Rotary or additional axes:
- Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive

Coolant, chip, and compressed air management:
- Bed flushing
- Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles
- Includes cartridge filter
- Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine)

Measuring and monitoring systems:
- RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm
- RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket

- Auto-door (side door)
- Pneumatic interface for workpiece clamping
- Clamping devices as shown

With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW)
Nsdpfeifn N Nsx Ab Rokt
- Full enclosure
- Double gripper

Available immediately

廣告是自動翻譯的，翻譯中可能會出現一些錯誤。