型材弯曲机 - 三辊弯曲机Curvatrice
DS60
型材弯曲机 - 三辊弯曲机
Curvatrice
DS60
EXW VB 不含增值税
€2,950
出厂年份
2000
状况
二手
(完全功能)
位置
Metelen 

基本数据
价格和位置
EXW VB 不含增值税
€2,950
- 位置:
- Metelen, 德国

拨打
优惠详情
- 广告编号:
- A23348291
- 更新:
- 最近更新时间为 18.11.2026
描述
Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Ready for Use & with Special Modification
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
Kjdpe Akvcdjfx Acasnd
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
该广告为自动翻译,可能存在翻译错误。
Manufacturer: Curvatrice s.r.l.
Model: DS60
Type: HV
Serial Number: 050G 1182
Year of Manufacture: 2000
For sale is a reliable and immediately ready-to-use profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV. We acquired the machine second-hand in 2012 and it has been continuously and well-maintained in our possession ever since.
We would be happy to demonstrate the machine on-site after prior arrangement.
Equipment & Scope of Supply:
• Rollers: Supplied including the standard rollers shown in the pictures (suitable for flat steel and U-profiles with flanges on the inside and outside). Further profiles require corresponding special tools.
12 spacer washers approx. round 78 x 3 mm
10 spacer washers approx. round 78 x 2 mm
40 spacer washers approx. round 78 x 1 mm
Kjdpe Akvcdjfx Acasnd
• Basic equipment: Original, laterally and height-adjustable guide rollers/shafts (34 x 270 mm) are included in the scope of supply.
• Special Modification for Transport & Installation: Specially manufactured, sturdy base frame for uncomplicated transport, including four height-adjustable leveling screws for precise alignment.
• Additional Modifications: An 8 mm thick steel plate has been mounted on the top side for the possible mounting of further attachments. In addition, a subsequently attached protective plate on the feed shaft reliably protects the slides from contamination.
Operation & Control:
• Separate control panel with digital position display for the upper roller
• Hydraulic feed/adjustment of the upper roller (controlled via operating buttons)
• Practical foot pedals for the rolling direction (left/right)
• Integrated emergency stop switch
Technical Data:
• Drive: 2.6 / 3.2 kW brake motor
• Speed: 2 stages (8 and 16 RPM)
• Shaft diameter: 50 mm (all three axes hardened and ground)
• Acceptance height: 115 mm
• Dimensions (H x W x L): approx. 1,360 x 750 x 1,500 mm
• Weight: approx. 425 kg
Important Notes:
• The performance data according to the manufacturer's brochure refers to a material strength of 40 kg/mm² (depending on the respective bending radius). These values are to be understood as approximate guidelines and are not binding. We will gladly send you the technical data sheet for the maximum possible bending capacities upon request.
• An operating manual is unfortunately no longer included in the scope of supply.
Sales and Delivery Conditions:
• Pricing: Ex Works (net, plus VAT).
• Logistics: Loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him.
• Technical specifications according to available documents. Subject to prior sale.
If you are interested or have any questions, we look forward to hearing from you to arrange a viewing appointment!
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
最后在线:昨天
注册于: 2026
16 在线广告
发送询价
电话 & 传真
+49 2556 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Balaguer
10,498 km
自调式焊接翻车机100t
OerlikonLP100
OerlikonLP100
成功
您的消息已发送。
小广告
Hergensweiler
9,548 km
焊接旋转台,旋转台
Protec 10 ToKT 10 000
Protec 10 ToKT 10 000
成功
您的消息已发送。
小广告
Kirchheim unter Teck
9,508 km
外圆磨床-外
KELLENBERGERR175-1500
KELLENBERGERR175-1500
成功
您的消息已发送。
小广告
Écouflant
10,188 km
数控弯管机
DAVIMCP18
DAVIMCP18
成功
您的消息已发送。
小广告
德国
9,174 km
四辊 - 金属板折弯机
IMCAR4RH 17/5
IMCAR4RH 17/5
成功
您的消息已发送。
小广告
Ringaudai
8,320 km
焊接装置
FRONIUSPLASMA WELDING
FRONIUSPLASMA WELDING
成功
您的消息已发送。
小广告
Dortmund
9,456 km
数控万能工具铣床
AVIAFNE 50 N / TNC 410
AVIAFNE 50 N / TNC 410
成功
您的消息已发送。
小广告
Wien
9,084 km
金属板折弯机 - 4 辊
AKBENDAHS 30/08
AKBENDAHS 30/08
成功
您的消息已发送。
小广告
Ditzingen
9,525 km
管道切割机
Orbitalum
Orbitalum
成功
您的消息已发送。
小广告
Ahaus
9,452 km
环形型材折弯机
AKBENDAPK 50
AKBENDAPK 50
您的广告已成功删除
发生错误































































































































