CTS温度试验箱 CTS T-40/2000，温度范围：-40°C至+180°C，容积2000升

CTS T-40/2000

CTS

Type: T-40/2000

Air-cooled temperature test chamber

Technical design:
Gusdpfozg Twajx Aa Teh

Refrigeration unit:
air-cooled, low-noise, hermetically sealed, stepless power adjustment
via electronic monitoring and control system,
environmentally friendly refrigerant R404A

Door:
fully opening door, left-hand door stop,
one-hand operation, lockable.

Insert shelf:
stainless steel, support area 970 x 980 + 500 mm
load per shelf max. 35 kg
total load with max. shelf load 100 kg

Test chamber lighting: 3x halogen lamp 20 W, 12 V

Control:

32-bit controller
LCD control panel
Digital display of setpoint and actual values
Numerical input of setpoints
Plain text error messages
RS 232 interface
free switching channels for on-site control of the test item

Temperature range: -40°C to +180°C

Rated voltage: 400V 3/N 50Hz
Rated power: 10.4 kW
Rated current: 17.2 A
Compressor: TFH2516Z

Pipe connection NW 50
Control panel
Window 570x710 mm
Electrical connection, cable length 5m

Technical performance data:

Temperature tests:
Temperature range -40°C to +180°C
Temperature deviation ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5
Heating 2.5 K/min
Cooling 1.5 K/min

Heat radiation:
approx. 2500 W at +20°C
approx. 2100 W at ± 0°C
approx. 1500 W at -20°C

The technical data refer to an ambient temperature of +25 °C,
rated voltage 400V, without test item, without radiation and without additional devices.

Dimensions:
Test volume: 2000 liters
Test chamber dimensions: height 900, width 975, depth 2200 mm
External dimensions: height 1950, width 1290, depth 3145 mm

Operating data:
Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz
Rated power: 17.2 kW
Protection class: IP 22
Condensate drain, non-pressurized, R 1/2" internal thread
Sound pressure level (according to DIN EN ISO 3744
measured at a distance of 1m from the front) < 55 dB(A)
Weight: approx. 1200 kg

For your safety as a buyer, the following information!

The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.

Condition: used

Scope of delivery: (See picture)

(Changes and errors in the technical data and specifications are subject to change!)

We would be happy to answer any further questions you may have by telephone.

该广告为自动翻译，可能存在翻译错误。