CTS 气候测试箱 C-70/600，温度范围 -70°C 至 +210°C，带湿度控制，容积 600 升

CTS C-70/600

CTS

Type: C-70/600

CTS C-70/600 climate testing chamber
air-cooled version
with observation window, test item protection, and documentation

For sale is a high-quality CTS climate testing chamber, type C-70/600,
for precise temperature and climate testing in research,
development, quality assurance, and industry.

The unit is in used condition
and can be fully inspected according to the images.
The current display shows manual operation/stop,
temperature actual value 16.59 °C, setpoint 5.00 °C,
humidity actual value 39.7 % RH, and water supply actual value 11.0 l.

Special feature of this version:
Extended high-temperature range up to +210 °C
(in many standard versions, only up to +180 °C)

Technical data:

Temperature range: -70 °C to +210 °C
Humidity range: 10 % to 98 % RH
Dew point range: -10 °C to +94 °C
Temperature change rate: approx. 2.5 K/min (heating/cooling)
Test chamber volume: 600 liters

Electrical connection: 400 V 3/N 50 Hz
Rated power: 9.0 kW
Rated current: 14.6 A
Protection class: IP 22

Refrigerant:
R452A (pre-cooling stage) / R23 (cooling stage)
Cascade refrigeration system for low-temperature operation down to -70 °C
Operating overpressure PS: 25 bar
Test pressure PT: 27.5 bar

Equipment / Features:

Ibedpfx Aey I Tdxscfec
Observation window in the door
Stainless steel test chamber
CTS control panel with digital setpoint/actual value display
Test item protection / temperature limiter
Water connection / deionized water supply
Test chamber and condensate drain
Pipe connections on the side of the test chamber
RS232 interface according to documentation
Digital outputs for test item control

Test chamber dimensions according to documentation:
approx. 850 x 850 x 830 mm

External dimensions according to documentation:
approx. 1900 x 1115 x 1850 mm

Weight according to documentation:
approx. 800 kg

Scope of supply:

CTS climate testing chamber C-70/600
Scope of supply as shown in the images

For your safety as a buyer:

The unit can be inspected by appointment.
Loading with a forklift can be arranged.

The following points are carried out on our offered chambers in advance:
1. Functional check and replacement of necessary components
2. If necessary, new filling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers are subjected to a documented test run.

Condition: used

(Changes and errors in the technical data are subject to change!)

We are happy to answer any further questions you may have over the phone.

该广告为自动翻译，可能存在翻译错误。