铣床CONTUR
MHA-5
铣床
CONTUR
MHA-5
製造年份
2024
狀況
展品机
位置
Wetzlar 

顯示圖片
显示地图
价格和位置
- 位置:
- Hauptstraße 68, 35585 Wetzlar, Deutschland
撥打
技术细节
- X轴行程:
- 600 毫米
- Y轴行程:
- 480 毫米
- Z轴移动距离:
- 310 毫米
- 主轴速度(最大):
- 2,000 转/分
- 主轴转速(最小):
- 40 转/分
- 羽毛笔划:
- 120 毫米
- 总高度:
- 1,820 毫米
- 总宽度:
- 1,780 毫米
- 总长度:
- 1,400 毫米
- 工作台宽度:
- 500 毫米
- 桌面长度:
- 900 毫米
- 工件重量(最大):
- 190 千克
- 工作台与主轴中心的距离:
- 390 毫米
- 设备:
- 文档 / 手册
优惠详情
- 產品ID:
- A6844996
- 最後更新:
- 於 12.11.2024
描述
Table surface (angled table): 900 x 500 mm
Max. Workpiece weight: 190 kg
Travel X: 600 mm
Travel Y: 450 mm
Travel Z: 380 mm
Guedohu Rwfepfx Af Ash
Quill travel Z1: 120 mm
Speed range: 40 - 2000 rpm
Gear stages: 18
Drive power: 3.75 kW
Tool taper: SK 40 (DIN 69871A)
Weight approx.: 1560 kg
including extensive standard accessories, e.g:
Work area cladding
3-axis digital readout CONTUR
Hydraulic tool clamp for vertical spindle Tool holder SK 40, DIN 69871A, tightening bolt DIN 69872,
incl. hydraulic unit
Monitored spindle protection
3 conventional handwheels
Complete electrical equipment for three-phase current 400 V, 50 Hz
Ball screws for X, Y and Z axes
Vertical milling head
Fixed angle table 900 x 500 mm clamping surface
Swivel device for vertical milling head
LED machine light
Protective bellows for the vertical and horizontal guideways guideways
Automatic central lubrication for the axis and ball screws
Coolant system with pump
Set (4 pcs.) of bearing elements
Including tool holder package consisting of:
1 x collet chuck ER40
7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Max. Workpiece weight: 190 kg
Travel X: 600 mm
Travel Y: 450 mm
Travel Z: 380 mm
Guedohu Rwfepfx Af Ash
Quill travel Z1: 120 mm
Speed range: 40 - 2000 rpm
Gear stages: 18
Drive power: 3.75 kW
Tool taper: SK 40 (DIN 69871A)
Weight approx.: 1560 kg
including extensive standard accessories, e.g:
Work area cladding
3-axis digital readout CONTUR
Hydraulic tool clamp for vertical spindle Tool holder SK 40, DIN 69871A, tightening bolt DIN 69872,
incl. hydraulic unit
Monitored spindle protection
3 conventional handwheels
Complete electrical equipment for three-phase current 400 V, 50 Hz
Ball screws for X, Y and Z axes
Vertical milling head
Fixed angle table 900 x 500 mm clamping surface
Swivel device for vertical milling head
LED machine light
Protective bellows for the vertical and horizontal guideways guideways
Automatic central lubrication for the axis and ball screws
Coolant system with pump
Set (4 pcs.) of bearing elements
Including tool holder package consisting of:
1 x collet chuck ER40
7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误