焊接设备

Cloos GLW 270

2015 Cloos GLW 270 CNC Welder and Plasma Cutter with Robot

CNC Control: Qirox C QRC 350, Welding source: Cloos Qineo Pulse 450, TIG Welding source: Cloos GLW 270, Plasma: Hypertherm HPR260XD, Basic parameters: diameter of processed ends from 500 to 5000 mm, end weight up to 5000 kg, diameter of processed pipes up to 1000 mm, length of processed pipes up to 3000 mm, pipe weight up to 500 kg, maximum cutting current of the plasma generator 230 A, maximum TIG welding current 270 A, maximum MAG welding current 450 A, Robotic station functionality: plasma cutting and chamfering of holes in bottoms with diameters ranging from 500 to 5000 mm, plasma cutting and chamfering of holes in shells with diameters ranging from 500 to 5000 mm (shell axis vertical), including at an angle to the vertical axis of the bottom, plasma cutting and chamfering of nozzles with a diameter of up to 1000 mm, welding of nozzles in bottoms with guaranteed penetration layers. The condition for obtaining proper penetration welds is proper preparation and assembly of the part – e.g., lack of end ovality (faulty material), even gap (incorrect assembly), etc. In the case of densely packed nozzles in the bottom, welds may be impossible due to lack of access with the welding torch. - welding of nozzles in shells, welding of tubes in tube sheets with diameters ranging from 500 to 5000 mm. The tubes in the tube sheets should be repeatedly secured and expanded. When welding tubes in tube sheets with diameters greater than 3000 mm, it will be necessary to rotate the tank several times. TIG process, MAG process, Maximum bottom thickness: 20 mm, Maximum jacket thickness: 12 mm, Station equipped with a filtration system, Station equipped with an automatic torch change system, Station equipped with a system enabling automatic joint position recognition, Station equipped with a vision system enabling process monitoring on a separate monitor with the option of connecting a plant recorder, Welding parameter recording and reading system, Manifold with a solenoid valve for shielding gas in the rotary table, Self-centering chuck in the 500-5000 range for the rotary table, Self-centering chuck for a vertical rotary table up to Ø600, S/No: 163 (2015)
Iaedpfxjy Dr Iho Alpor