冲孔及咬口机CIMSA
LMTC/125
冲孔及咬口机
CIMSA
LMTC/125
FCA VB 不含增值税
€94,900
出厂年份
2007
状况
二手
(完全功能)
位置
Sandersdorf-Brehna 

价格和位置
FCA VB 不含增值税
€94,900
- 位置:
- Sandersdorf-Brehna, 德国

拨打
技术细节
尺寸和重量
总长度:
22,500 毫米
总高度:
4,500 毫米
优惠详情
- 广告编号:
- A23363245
- 更新:
- 最近更新时间为 20.11.2026
描述
Colgar CIMSA LMTC/125 punching machine from 2007.
The machine has been used very rarely, has few operating hours, and is in perfect condition.
The machine has 7 coil holders and 46 tool holders.
Ksdpe Ak Uzqofx Acaodw
Technical data:
Ijbo Aku Sbsn E Afdrotp
Number of coil holders: 7
Number of tool holders: 46
Max. coil width / strip width: 1,300 mm
Material thickness: min. 0.8 mm to max. 3.0 mm
Material: sheet metal with a tensile strength of 52 kg/mm
Compressed air working pressure: 6 bar
Data of the coil holders:
Spool 1–4: max. load capacity 7,000 kg, max. strip width 1,300 mm, max. coil outer diameter 1,200 mm.
Spool 5: max. load capacity 5,000 kg, max. strip width 1,300 mm, max. coil outer diameter 1,500 mm.
Spool 6–7: max. load capacity 5,000 kg, max. strip width 600 mm, max. coil outer diameter 1,500 mm.
Diameter of the coil gripping spindle for all spools: 470/530 mm.
For all spools:
Minimum material thickness of 0.8 mm
Maximum material thickness of 3.0 mm apply.
Self-collection, assistance with dismantling possible.
该广告为自动翻译,可能存在翻译错误。
The machine has been used very rarely, has few operating hours, and is in perfect condition.
The machine has 7 coil holders and 46 tool holders.
Ksdpe Ak Uzqofx Acaodw
Technical data:
Ijbo Aku Sbsn E Afdrotp
Number of coil holders: 7
Number of tool holders: 46
Max. coil width / strip width: 1,300 mm
Material thickness: min. 0.8 mm to max. 3.0 mm
Material: sheet metal with a tensile strength of 52 kg/mm
Compressed air working pressure: 6 bar
Data of the coil holders:
Spool 1–4: max. load capacity 7,000 kg, max. strip width 1,300 mm, max. coil outer diameter 1,200 mm.
Spool 5: max. load capacity 5,000 kg, max. strip width 1,300 mm, max. coil outer diameter 1,500 mm.
Spool 6–7: max. load capacity 5,000 kg, max. strip width 600 mm, max. coil outer diameter 1,500 mm.
Diameter of the coil gripping spindle for all spools: 470/530 mm.
For all spools:
Minimum material thickness of 0.8 mm
Maximum material thickness of 3.0 mm apply.
Self-collection, assistance with dismantling possible.
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
最后在线:昨天
注册于: 2022
1 在线广告
发送询价
电话 & 传真
+49 9665 ... 广告
您的广告已成功删除
发生错误















