测试表Chroma Batteriepack-Tester
ATE 17020
测试表
Chroma Batteriepack-Tester
ATE 17020
固定价格 不包含增值稅
€35,000
狀況
二手
位置
Borken 

顯示圖片
显示地图
机器数据
价格和位置
固定价格 不包含增值稅
€35,000
- 位置:
- Einsteinstraße 8a, 46325 Borken, Deutschland

撥打
优惠详情
- 產品ID:
- A19479136
- 參考編號:
- 24588
- 最後更新:
- 於 17.11.2025
描述
Chroma
Type: ATE 17020
The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification.
Particularly strong in:
- Lifetime testing, BMS verification, and validation of complex charging cycles
- High energy recovery – up to 85% efficiency
- Flexible expansion through numerous channels or higher current ranges
- Enterprise deployment with extensive safety features & data persistence
Technical data – Chroma ATE 17020 PTS
Feature Specification
Model: Chroma ATE 17020 PTS
System type: Regenerative battery pack test system (charge/discharge test)
Channel output: 600 W to 60 kW (modular and scalable)
Total output: Up to 600 kW (depending on configuration)
Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V
Current per channel: Depending on module: from a few amps up to >300 A per channel
Parallel operation: Yes, for higher current up to 2,600 A
Current and voltage accuracy: ±(0.05% of reading + 0.05% of range)
Power accuracy: ±0.1%
Transition time (charge/discharge): < 50 ms
Sampling rate (measured data): up to 50 kHz (with BatteryPro)
Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure
Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles
Number of channels: Up to 60 channels (expandable)
Communication: CAN, S-Bus, Ethernet, USB
Software: Chroma BatteryPro (test programming, real-time monitoring)
Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc.
Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%)
Cooling: Fan cooling, low waste heat due to energy recuperation
Temperature monitoring: Optionally integrable, range 0–90°C ±2°C
Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg)
Cedpfxjwwrxaj Aftoaa
Mains connection: 3-phase, 400 V AC (depending on model)
Applications: E-mobility, battery development, quality assurance, cell research
Weight: approx. 455 kg
Condition: used
Scope of delivery: (See picture)
(Specifications and technical data are subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
Type: ATE 17020
The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification.
Particularly strong in:
- Lifetime testing, BMS verification, and validation of complex charging cycles
- High energy recovery – up to 85% efficiency
- Flexible expansion through numerous channels or higher current ranges
- Enterprise deployment with extensive safety features & data persistence
Technical data – Chroma ATE 17020 PTS
Feature Specification
Model: Chroma ATE 17020 PTS
System type: Regenerative battery pack test system (charge/discharge test)
Channel output: 600 W to 60 kW (modular and scalable)
Total output: Up to 600 kW (depending on configuration)
Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V
Current per channel: Depending on module: from a few amps up to >300 A per channel
Parallel operation: Yes, for higher current up to 2,600 A
Current and voltage accuracy: ±(0.05% of reading + 0.05% of range)
Power accuracy: ±0.1%
Transition time (charge/discharge): < 50 ms
Sampling rate (measured data): up to 50 kHz (with BatteryPro)
Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure
Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles
Number of channels: Up to 60 channels (expandable)
Communication: CAN, S-Bus, Ethernet, USB
Software: Chroma BatteryPro (test programming, real-time monitoring)
Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc.
Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%)
Cooling: Fan cooling, low waste heat due to energy recuperation
Temperature monitoring: Optionally integrable, range 0–90°C ±2°C
Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg)
Cedpfxjwwrxaj Aftoaa
Mains connection: 3-phase, 400 V AC (depending on model)
Applications: E-mobility, battery development, quality assurance, cell research
Weight: approx. 455 kg
Condition: used
Scope of delivery: (See picture)
(Specifications and technical data are subject to change and errors excepted!)
If you have further questions, we are happy to assist you by phone.
廣告是自動翻譯的,翻譯中可能會出現一些錯誤。
您的广告已成功删除
发生错误









