烟雾抽吸BRAS ASPIRATION
PR 3000-160EXC
烟雾抽吸
BRAS ASPIRATION
PR 3000-160EXC
固定价格 不含增值税
€400
出厂年份
2025
状况
全新
位置
Chalon-sur-Saône 

显示图片
显示地图
机器数据
价格和位置
固定价格 不含增值税
€400
- 位置:
- 23 rue Colbert, 71100 Chalon-sur-Saône, France

拨打
优惠详情
- 广告编号:
- A21152202
- 更新:
- 最近更新时间为 17.03.2026
描述
The PR EXC extraction arm is manufactured in accordance with the requirements of ATEX Directive 94/9/EC concerning equipment intended for use in potentially explosive atmospheres.
The extraction arm meets the requirements of Equipment Group II for gases and dusts. The local extractor is therefore suitable for workplaces requiring the safe handling of explosive gases and dusts.
The device is suitable for use in Zone 1 or 21; these are areas where an explosive atmosphere is likely to occur during normal operation.
Application
The design and features are unique, as highlighted:
Exceptionally easy to handle, especially due to its stable positioning, the extraction arm features an optimally designed hood, maximum extraction efficiency, and maximum collection capacity.
The ATEX environment PR arm is designed according to Fumex’s core principles:
Support arms positioned externally
Technical Data
Length – 3000 mm
Dimensions – Ø 160 mm
Marked EX II 2 GD
Kledpfx Aeygurmobdjp
Load-bearing parts with electroconductive powder coating and plastic parts made from electroconductive polypropylene.
该广告为自动翻译,可能存在翻译错误。
The extraction arm meets the requirements of Equipment Group II for gases and dusts. The local extractor is therefore suitable for workplaces requiring the safe handling of explosive gases and dusts.
The device is suitable for use in Zone 1 or 21; these are areas where an explosive atmosphere is likely to occur during normal operation.
Application
The design and features are unique, as highlighted:
Exceptionally easy to handle, especially due to its stable positioning, the extraction arm features an optimally designed hood, maximum extraction efficiency, and maximum collection capacity.
The ATEX environment PR arm is designed according to Fumex’s core principles:
Support arms positioned externally
Technical Data
Length – 3000 mm
Dimensions – Ø 160 mm
Marked EX II 2 GD
Kledpfx Aeygurmobdjp
Load-bearing parts with electroconductive powder coating and plastic parts made from electroconductive polypropylene.
该广告为自动翻译,可能存在翻译错误。
供應商
注意: 免费注册或登录,以获取所有信息。
注册于: 2025
9 在线广告
发送询价
电话 & 传真
+33 6 44 ... 广告
您的广告已成功删除
发生错误






