加工中心BIESSE
Rover C 9.65 (5-Axis)
加工中心
BIESSE
Rover C 9.65 (5-Axis)
出厂年份
2011
状况
二手
位置
Rosmalen 

基本数据
价格和位置
- 位置:
- Vinkenveld 3, 5249 JN Rosmalen, Netherlands

拨打
技术细节
刀库
刀库刀位数量:
33
功率详情
输入电压:
400 V
输入频率:
50 赫兹
输入电流:
39 A
文件和认证
CE标志
轴规格
X轴行程:
6,200 毫米
Y轴行程:
1,935 毫米
Z轴移动距离:
275 毫米
更多详细信息
轴数:
5
优惠详情
- 广告编号:
- A23353406
- 参考编号:
- EXG073954
- 更新:
- 最近更新时间为 18.11.2026
描述
Biesse Rover C 9.65 Config. 3 CNC machining centre 5-Axis
Description
Working fields; X = 6200 mm; Y = 1935 mm; Z = 275 mm
Multizone - 10 panel supports and 40 bases for locking modules
10 ATS panel supports - L = 1525 mm - 40 sliding bases
Automatic positioning of 10 panel supports and sliding bases (EPS X-Y)
10 Stops with a stroke of 115 mm
10 Stops with a stroke of 140 mm positioned at 770 mm (L= 1280, 1525, 1800 mm)
10 Stops with a stroke of 140 mm positioned at 1175 mm (L= 1280 - 1525 - 1800 mm)
4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system
2 Additional side stops with a stroke of 140 mm (1 Lh + 1 Rh)
Sensor for the detection of lowered stop.
One sensor on each stop the machine is equipped with should be selected.
Pneumatic system for bar supports with double stroke - 4 independent work areas in X
8 Bar supports with double pneumatic stroke for Uniclamp modules (H=74 mm) for piece thickness from 40 to 98 mm
Vacuum module with dimensions 132 x 75 x H74 mm
Uniclamp module with double movement, thickness 40 - 98, quick coupling, H=74
Uniclamp module with double movement, thickness 83 - 140, quick coupling, H=74
Belt conveyor for the removal of chips and off-cuts
Vacuum system for a 250 m3/h pump
250 m3/h vacuum pump
Operating unit with 5 interpolating axes
Liquid cooling box - 1600 W - for electro spindles
Belt tool changer with 15 places for 5 axes unit
Additional Z carriage for back operating units, controlled by an independent Z axis
Peak Power electro spindle, with liquid cooling.
High torque electro spindle, specific for hard machinings with low rotation speed.
HSK F63 adaptor.
Liquid cooling box required.
Operating device with 360° rotation and gear transmission.
Incompatible with the flange for aggregate assembly.
Iijdpj Ak Ab Tofx Ah Aji
Revolving tool changer with 5 places + chip deflector
For machines with ISO 30 connection, incompatible with the presser for C axis.
Prearrangement for the assembly of a chip deflector on a standard electro spindle
Iron gripper, positioned in the chain tool changer, for the storage of a chip deflector to be used on a standard electro spindle
RH Chip deflector for standard electro spindle
Belt tool changer with 33 places at 120 mm centre distance
Automatic lubrication system
Software update from BiesseWorks (machine version) to BiesseWorks Advanced (machine version)
BiesseWorks - Advanced programming system - office version
CE Safety devices
(Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales).
(Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf).
Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher
Best woodworkingmachines from the Netherlands Holland
Die besten holzbearbeitungsmaschinen aus die Niederlande
De beste gebruikte machines uit Nederland
Description
Working fields; X = 6200 mm; Y = 1935 mm; Z = 275 mm
Multizone - 10 panel supports and 40 bases for locking modules
10 ATS panel supports - L = 1525 mm - 40 sliding bases
Automatic positioning of 10 panel supports and sliding bases (EPS X-Y)
10 Stops with a stroke of 115 mm
10 Stops with a stroke of 140 mm positioned at 770 mm (L= 1280, 1525, 1800 mm)
10 Stops with a stroke of 140 mm positioned at 1175 mm (L= 1280 - 1525 - 1800 mm)
4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system
2 Additional side stops with a stroke of 140 mm (1 Lh + 1 Rh)
Sensor for the detection of lowered stop.
One sensor on each stop the machine is equipped with should be selected.
Pneumatic system for bar supports with double stroke - 4 independent work areas in X
8 Bar supports with double pneumatic stroke for Uniclamp modules (H=74 mm) for piece thickness from 40 to 98 mm
Vacuum module with dimensions 132 x 75 x H74 mm
Uniclamp module with double movement, thickness 40 - 98, quick coupling, H=74
Uniclamp module with double movement, thickness 83 - 140, quick coupling, H=74
Belt conveyor for the removal of chips and off-cuts
Vacuum system for a 250 m3/h pump
250 m3/h vacuum pump
Operating unit with 5 interpolating axes
Liquid cooling box - 1600 W - for electro spindles
Belt tool changer with 15 places for 5 axes unit
Additional Z carriage for back operating units, controlled by an independent Z axis
Peak Power electro spindle, with liquid cooling.
High torque electro spindle, specific for hard machinings with low rotation speed.
HSK F63 adaptor.
Liquid cooling box required.
Operating device with 360° rotation and gear transmission.
Incompatible with the flange for aggregate assembly.
Iijdpj Ak Ab Tofx Ah Aji
Revolving tool changer with 5 places + chip deflector
For machines with ISO 30 connection, incompatible with the presser for C axis.
Prearrangement for the assembly of a chip deflector on a standard electro spindle
Iron gripper, positioned in the chain tool changer, for the storage of a chip deflector to be used on a standard electro spindle
RH Chip deflector for standard electro spindle
Belt tool changer with 33 places at 120 mm centre distance
Automatic lubrication system
Software update from BiesseWorks (machine version) to BiesseWorks Advanced (machine version)
BiesseWorks - Advanced programming system - office version
CE Safety devices
(Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales).
(Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf).
Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher
Best woodworkingmachines from the Netherlands Holland
Die besten holzbearbeitungsmaschinen aus die Niederlande
De beste gebruikte machines uit Nederland
发送询价
电话 & 传真
+31 73 20... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
德国
9,335 km
木材板材切割锯 Holzma HPP 350/43/38(2008年)
HolzmaHPP 350/43/38
HolzmaHPP 350/43/38
成功
您的消息已发送。
小广告
Ennepetal
9,482 km
振动研磨机
GERD WOLFFVKUE 350
GERD WOLFFVKUE 350
成功
您的消息已发送。
小广告
Zambrów
8,491 km
缺口锯
GRAULEAS 450
GRAULEAS 450
成功
您的消息已发送。
小广告
Jettingen-Scheppach
9,459 km
砂盘
AL-KOAST 1.5 BASIC
AL-KOAST 1.5 BASIC
成功
您的消息已发送。
小广告
Wiesbaden
9,502 km
曲柄剪板
LOTZEKS 25
LOTZEKS 25
成功
您的消息已发送。
小广告
Barntrup
9,335 km
CNC加工中心 SCM Morbidelli N100 22-31 PROSPACE(2022年)
SCMMorbidelli N100 22-31 PROSPACE
SCMMorbidelli N100 22-31 PROSPACE
成功
您的消息已发送。
小广告
Sesto Calende
9,731 km
横梁加工中心
UniteamCovertek
UniteamCovertek
成功
您的消息已发送。
小广告
Líšnice
8,984 km
折弯机
TrumpfTrubend 5170 4-Meter
TrumpfTrubend 5170 4-Meter
成功
您的消息已发送。
小广告
土耳其
8,214 km
小松 PC350 岩石铲斗
KomatsuPC350 Rock Bucket
KomatsuPC350 Rock Bucket
成功
您的消息已发送。
小广告
Barntrup
9,335 km
BIESSE Brema EKO 2.2 立式数控加工中心(2022 年)
BIESSEBrema EKO 2.2
BIESSEBrema EKO 2.2
您的广告已成功删除
发生错误










































































































