数控加工中心 Biesse Rover C 9.50(2007年)Biesse
Rover C 9.50
数控加工中心 Biesse Rover C 9.50(2007年)
Biesse
Rover C 9.50
出厂年份
2007
状况
二手
位置
德国 

基本数据
价格和位置
- 位置:
- , 德国

拨打
优惠详情
- 广告编号:
- A22564722
- 参考编号:
- WEHRMANN-0401907
- 更新:
- 最近更新时间为 17.08.2026
描述
- Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm
- CE safety devices
- 8 ATS plate holders - L = 1525 mm - 24 sliding rails
- Automatic positioning of 8 plate holders and sliding rails (EPS X-Y)
- Conveyor belt for removing chips and scrap
- Pneumatic locking system, divided into 2 working areas in X
- 8 rear reference stops with a stroke of 115 mm
- 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm)
- 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm)
- 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
Hodpfx Aiozux Nwsgonw
- 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
- Sensor for detecting lowered stops.
- Pneumatic system for lifting rod holders.
- 6 lifting rod holders for easy loading - H = 74 mm modules.
- Vacuum system for a 250 m3/h pump
- 250 m3/h rotary vane vacuum pump for standard vacuum system
Composition C3-A1
- Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit.
- Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position.
Composition C3-P2
- Additional Z-slide for rear work units, controlled by an independent Z-axis
- 16 vertical and 4 horizontal drilling spindles in the Y direction
- Chain-type tool changer with 22 positions at 180 mm center distance
- Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer
- RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle
- Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head.
- Automatic lubrication system
- Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions.
Note:
- Additional overhauled 5-axis main spindle
- 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.
该广告为自动翻译,可能存在翻译错误。
- CE safety devices
- 8 ATS plate holders - L = 1525 mm - 24 sliding rails
- Automatic positioning of 8 plate holders and sliding rails (EPS X-Y)
- Conveyor belt for removing chips and scrap
- Pneumatic locking system, divided into 2 working areas in X
- 8 rear reference stops with a stroke of 115 mm
- 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm)
- 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm)
- 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
Hodpfx Aiozux Nwsgonw
- 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system.
- Sensor for detecting lowered stops.
- Pneumatic system for lifting rod holders.
- 6 lifting rod holders for easy loading - H = 74 mm modules.
- Vacuum system for a 250 m3/h pump
- 250 m3/h rotary vane vacuum pump for standard vacuum system
Composition C3-A1
- Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit.
- Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position.
Composition C3-P2
- Additional Z-slide for rear work units, controlled by an independent Z-axis
- 16 vertical and 4 horizontal drilling spindles in the Y direction
- Chain-type tool changer with 22 positions at 180 mm center distance
- Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer
- RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle
- Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head.
- Automatic lubrication system
- Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions.
Note:
- Additional overhauled 5-axis main spindle
- 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 5263 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
Kecskemét
8,916 km
加工中心
BIESSERover C 9.50
BIESSERover C 9.50
成功
您的消息已发送。
小广告
意大利
9,680 km
单面封边机
BIESSESTREAM A
BIESSESTREAM A
成功
您的消息已发送。
小广告
Ponte di Piave
9,476 km
加工中心
BIESSEROVER C 9.50 CONF. 3
BIESSEROVER C 9.50 CONF. 3
成功
您的消息已发送。
小广告
意大利
9,680 km
五轴加工中心
BIESSEROVER C 9.50
BIESSEROVER C 9.50
成功
您的消息已发送。
小广告
意大利
9,680 km
裁板锯 - 从前面装载
BIESSESEKTOR 450
BIESSESEKTOR 450
成功
您的消息已发送。
小广告
Kežmarok
8,770 km
角窗加工中心
WeinigUnicontrol 10
WeinigUnicontrol 10
成功
您的消息已发送。
小广告
Wijchen
9,541 km
四面刨床 Weinig Unimat 500 2006年
WeinigUnimat 500
WeinigUnimat 500
成功
您的消息已发送。
小广告
Schwanberg
9,236 km
厚度刨床
SCMS 52
SCMS 52
成功
您的消息已发送。
小广告
Colonnella
9,532 km
多片锯
TrademakSQUALO 515 LM
TrademakSQUALO 515 LM
成功
您的消息已发送。
小广告
Gerolzhofen
9,381 km
厚度刨床
HOFMANNDH510-2
HOFMANNDH510-2
您的广告已成功删除
发生错误
























































































































































