通用加工中心AXA
VHC 3-M/2E
机器数据
技术细节
- X轴行程:
- 2,600 毫米
- Y轴行程:
- 700 毫米
- Z轴移动距离:
- 850 毫米
- 控制器型号:
- Heidenhain iTNC-530
- 主轴速度（最大）:
- 6,000 转/分
提供
- 位置:
- Veneto, 意大利
– 距离：约 9,544 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- EXW
免费
描述
The machining center was completely overhauled and repainted in 2025!
TECHNICAL DETAILS
Travel ranges
Travel range X-axis: 2,600 mm
Travel range Y-axis: 700 mm
Travel range Z-axis: 850 mm
Spindle
Spindle speed: 6,000 rpm
Distance from spindle nose to table surface with vertical head: 40 - 890 mm
Distance from spindle nose to table surface with horizontal head: 250 - 1,100 mm
Spindle mounting: HSK A63
Spindle motor power: 20 kW
Table
Table size: 3,060 x 800 mm
Max. table load: 1,200 kg/m²
Feed rate
Rapid traverse rate X/Y-axis: 40,000 mm/min
Rapid traverse rate Z-axis: 30,000 mm/min
Swivel head
Automatic swivel head B-axis: ± 90°
Smallest automatic head rotation B-axis: 0.001°
Tool magazine
Number of tool magazines: 2
Tool positions per tool magazine: 22
Total tool positions: 44
Maximum tool diameter: 85 mm
Maximum tool length: 400 mm
MACHINE DETAILS
Control model: Heidenhain iTNC-530
Footprint: 9,600 x 3,300 mm
Machine height: 3,400 mm
EQUIPMENT
Continuously variable, automatically swiveling head on B-axis ± 90°
Two tool magazines, each with 22 positions
High-pressure coolant supply through the spindle
Chain-type chip conveyor
Operating and maintenance manuals
CNC manuals
The following work was carried out on the machine in 2025 for overhaul purposes:
Disassembly and overhaul of the ball screw drive or axis spindle, as well as replacement of the bearings of the X, Y and Z axes
Re-grinding of the wedge/guide strips of the X, Y and Z axes
Repair of the double tool changer, including replacement of the defective encoder, sensor and energy chain
Straightening and replacement of bent sheet metal
Replacement of oil and filters and cleaning of the tank
Disassembly of the machine table for repair, calibration and cleaning
Repair of the coolant tank, including restoration of the float switches, paper filter sensors and pumps
Repair and/or replacement of pushbuttons, damaged cables, fans, connectors and sensors of the double workstation
Replacement of the bellows of the X-axis with new parts
该广告为自动翻译，可能存在翻译错误。
支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 广告编号:
- A22288932
- 参考编号:
- AUC-2607053
- 更新:
- 最近更新时间为 08.07.2026
- 独家优惠:
- 仅在拍卖中提供
参观
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我们检查什么？
检查
营业执照或商业登记摘录
检查经销商的
邮寄地址
银行账户信息验证
主电话号码的
电话
可接通性验证
企业信用报告
不得显示任何负面特征
买家的投诉
可能导致认证标志被撤销这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。