立式加工中心

AWEA BM-1200

For sale is an AWEA BM-1200 CNC-controlled vertical machining center, manufactured in 06/2008.

The machine is equipped with a Heidenhain iTNC 530 CNC control system and features an automatic tool changer with 40 tool positions. In addition, the machine is equipped with internal coolant / cooling through the spindle, a high-pressure coolant system, and a chip conveyor.

Technical data / equipment:

Manufacturer: AWEA Mechatronic Co., Ltd.
Model: BM-1200
Serial number: 8015
Date of manufacture: 06/2008
Control system: Heidenhain iTNC 530
15" TFT color display
Tool holder: BT40
Spindle speed: 50 – 12,000 rpm
Spindle power: 21 / 15 kW
Direct drive spindle
Travel X-axis: 1,200 mm
Travel Y-axis: 600 mm
Travel Z-axis: 600 mm
Table size: 1,300 x 600 mm
Rapid traverse X/Y: 30 m/min
Rapid traverse Z: 24 m/min
Tool magazine: 40 positions
Tool change time: approx. 4 seconds
Dual gripper
Internal coolant / cooling through the spindle, Type A
High-pressure coolant pump 20 bar
Additional coolant tank
Two switchable filter cartridges
Fgjdpfx Aaozp Iz Eefsf
Chip conveyor parallel to the X-axis
Heidenhain infrared probe system TS 640
Signal light 3-color Red/Yellow/Green
Completely enclosed work area with work area lighting
Machine documentation available
Toolbox
Alignment screws and washers
CE specification
Weight according to nameplate: approx. 7,500 kg
Voltage: 400 V
Connected load: 25 kVA
Frequency: 50/60 Hz
3 phases

Condition:

The machine is in used condition but is complete and well-maintained. Inspection and test run possible by arrangement.

该广告为自动翻译，可能存在翻译错误。