Autotherm 6回路温度控制器 AWF 130-27/VK/6KAutotherm
Temperaturregelgerät AWF 130-27/VK/6K
Autotherm 6回路温度控制器 AWF 130-27/VK/6K
Autotherm
Temperaturregelgerät AWF 130-27/VK/6K
VB 不含增值税
€80,000
状况
二手
位置
Borken 

基本数据
- 制造商:
- Autotherm
- 状况:
- 二手
价格和位置
VB 不含增值税
€80,000
- 位置:
- Einsteinstraße 8a, 46325 Borken, Deutschland

拨打
优惠详情
- 广告编号:
- A22147572
- 参考编号:
- 23415
- 更新:
- 最近更新时间为 15.10.2026
描述
Autotherm
Type: Autotherm temperature control unit AWF 130-27/VK/6K
6-circuit temperature control unit
Without active refrigeration unit!
According to the enclosed technical brief:
Hfjdpfx Aaozd Rtys Tjn
Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C)
Increased heating capacity: 27 kW instead of 18 kW
Includes 1x temperature control in the main circuit
Includes 6x temperature measurement in each supply line
Includes 6x temperature measurement in each return line
Includes 6x flow rate and pressure measurement in each supply line
Includes 6x flow rate and pressure control
1 l/min .. 12 l/min and 0.1 bar … 3 bar
Including changeover control
Including frequency inverter-controlled pump in the main circuit
Including 6x 3-way valve
Includes 6x additional relief valve 2 … 12 bar, adjustable
Preset to 2.4 bar
Includes filling and draining device
For all circuits, jointly/simultaneously
Including 50-liter integrated tank
Including pneumatic drain function
Including S7 control system
Energy saving and increased cooling capacity:
An additional glycol circuit integrated into the temperature control circuit takes over
the cooling of the consumer in a temperature range of +85°C
to +30°C. The absorbed energy is transferred to the on-site
< 20°C chilled water network. The cooling capacity at a
supply temperature of +20°C is: 50 kW.
This increases the cooling speed in this temperature range and saves
energy due to the shorter running time of the refrigerant compressor.
(The footprint of the base unit increases by approx. 0.3 m² according to the data sheet).
Assembly in Rittal modular enclosure:
2x TS8 800x1000x2000 mm
1x additional, separate enclosure, min. 600x600x2000 mm
(for control/electrical components)
Supplied via on-site or optional cooling medium supply.
Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated.
For cooling capacity, a cooling medium must be connected!
Weight approx. 1200 kg
Sold ex-works!
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
该广告为自动翻译,可能存在翻译错误。
Type: Autotherm temperature control unit AWF 130-27/VK/6K
6-circuit temperature control unit
Without active refrigeration unit!
According to the enclosed technical brief:
Hfjdpfx Aaozd Rtys Tjn
Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C)
Increased heating capacity: 27 kW instead of 18 kW
Includes 1x temperature control in the main circuit
Includes 6x temperature measurement in each supply line
Includes 6x temperature measurement in each return line
Includes 6x flow rate and pressure measurement in each supply line
Includes 6x flow rate and pressure control
1 l/min .. 12 l/min and 0.1 bar … 3 bar
Including changeover control
Including frequency inverter-controlled pump in the main circuit
Including 6x 3-way valve
Includes 6x additional relief valve 2 … 12 bar, adjustable
Preset to 2.4 bar
Includes filling and draining device
For all circuits, jointly/simultaneously
Including 50-liter integrated tank
Including pneumatic drain function
Including S7 control system
Energy saving and increased cooling capacity:
An additional glycol circuit integrated into the temperature control circuit takes over
the cooling of the consumer in a temperature range of +85°C
to +30°C. The absorbed energy is transferred to the on-site
< 20°C chilled water network. The cooling capacity at a
supply temperature of +20°C is: 50 kW.
This increases the cooling speed in this temperature range and saves
energy due to the shorter running time of the refrigerant compressor.
(The footprint of the base unit increases by approx. 0.3 m² according to the data sheet).
Assembly in Rittal modular enclosure:
2x TS8 800x1000x2000 mm
1x additional, separate enclosure, min. 600x600x2000 mm
(for control/electrical components)
Supplied via on-site or optional cooling medium supply.
Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated.
For cooling capacity, a cooling medium must be connected!
Weight approx. 1200 kg
Sold ex-works!
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by telephone.
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 2861 ... 广告
您的广告已成功删除
发生错误

















