Bluhm Systeme 标记激光器,光纤激光器型号 e-SolarMark FL,无功能保证(未经测试)Bluhm Systeme
e-SolarMark FL
Bluhm Systeme 标记激光器,光纤激光器型号 e-SolarMark FL,无功能保证(未经测试)
Bluhm Systeme
e-SolarMark FL
VB 不含增值税
€4,800
状况
二手
位置
Borken 

基本数据
价格和位置
VB 不含增值税
€4,800
- 位置:
- Einsteinstraße 8a, 46325 Borken, Deutschland

拨打
优惠详情
- 广告编号:
- A22186232
- 参考编号:
- 23922
- 更新:
- 最近更新时间为 15.10.2026
描述
Bluhm Systems
Type: e-SolarMark FL
Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion.
Technical Specifications
e-SolarMark Description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser Specifications (Standard Version)
Laser Type - Fiber Laser
Laser Output Power - FL2 Model: 19W; typical
Wavelength - 1062 nm typical
Internal Modulation - 20 to 80 kHz
Scanner Head Description:
Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens Types and Their Properties:
Lens - Marking field 70x70 mm to 300 x 300 mm
Focal distance - 192 mm
Operating Environment Conditions:
Relative humidity up to 80%, non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length, marking/control unit 3 m
Weight, marking unit 5 kg
Weight, control unit 15 kg
Isdpfezgci Eox Acbetn
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption, FL2 model 450W
Condition: used
Scope of delivery: (See picture)
(Subject to changes and errors in the technical data!)
We will be happy to answer any further questions you may have by telephone.
该广告为自动翻译,可能存在翻译错误。
Type: e-SolarMark FL
Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested).
Introduction:
The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines.
The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion.
Technical Specifications
e-SolarMark Description
The e-SolarMark system consists of two main components:
1. The marking unit with laser head (scanning head) with focusing lens.
2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside.
The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm.
Laser Specifications (Standard Version)
Laser Type - Fiber Laser
Laser Output Power - FL2 Model: 19W; typical
Wavelength - 1062 nm typical
Internal Modulation - 20 to 80 kHz
Scanner Head Description:
Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating.
F-Theta
Lens Types and Their Properties:
Lens - Marking field 70x70 mm to 300 x 300 mm
Focal distance - 192 mm
Operating Environment Conditions:
Relative humidity up to 80%, non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length, marking/control unit 3 m
Weight, marking unit 5 kg
Weight, control unit 15 kg
Isdpfezgci Eox Acbetn
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption, FL2 model 450W
Condition: used
Scope of delivery: (See picture)
(Subject to changes and errors in the technical data!)
We will be happy to answer any further questions you may have by telephone.
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 2861 ... 广告
这些广告您可能也感兴趣。
成功
您的消息已发送。
小广告
瑞士
9,568 km
MAHO 1600S
MAHO1600S
MAHO1600S
成功
您的消息已发送。
小广告
德国
9,303 km
数控立式加工中心
SPINNERMVC 1000
SPINNERMVC 1000
您的广告已成功删除
发生错误


































