折弯机Bluhm Systeme
e-SolarMark FL
折弯机
Bluhm Systeme
e-SolarMark FL
固定价格 不含增值税
€4,800
状况
二手
位置
Borken 

显示图片
显示地图
机器数据
价格和位置
固定价格 不含增值税
€4,800
- 位置:
- Einsteinstraße 8a, 46325 Borken, Deutschland

拨打
优惠详情
- 广告编号:
- A14565049
- 参考编号:
- 23922
- 更新:
- 最近更新时间为 15.11.2024
描述
Bluhm Systeme marking lasers
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Focus distance B 192 mm
Working environment Conditions:
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
Gbjdpfoq Rtz Hox Aadjk
该广告为自动翻译,可能存在翻译错误。
Here we offer you a Bluhm Systeme marking laser.
Bluhm Systeme marking laser fiber laser e-SolarMark FL Without function guarantee (untested)
Introduction:
The e-SolarMark FL10W and 30 W are class IV lasers in accordance with the lEC 825
and EN 60825 (standards for end-user applications). It is designed to be
integrated into a system or operated separately with a protective housing.
After installation, the laser system must meet the requirements for a protection class
product in accordance with the above-mentioned directives.
The e-SolarMark is a laser system for marking and engraving plastics,
metals and foils while stationary or in motion.
Technical specifications
e-SolarMark description
The e-SolarMark system consists of two main components:
1. the marking unit with laser head (scanning head) with focusing lens.
2. the control unit contains the power supply unit, electronic control system and firmware
for the system function, I/O slots inside.
The e-SolarMark includes a fixed galvo scanning head equipped with a lens for
a square marking field with standard dimensions of 70 X 70 mm
Laser specification in standard version
Laser Type---Fiber Laser
Laser output power---FL2 model: 19W; typical
Wavelength---1062 nm typical
Internal Modulation---20 to 80 kHz
Scanner Head Description:
Scan Head---Two galvanometric mirror scanners with hard,
highly reflective dielectric coating.
F-Theta
Lens types and their characteristics:
Lens marking field 70x70 mm to 300 x 300 mm
Focus distance B 192 mm
Working environment Conditions:
Relative humidity up to 80% non-condensing
Operating temperature 5 - 40°C
Recommended operating temperature 15-25°C
Dimensions W x H x D
Laser unit 122 x 108 x 495 mm
Control unit 520 x 380 x 215 mm
Cable length marking/control unit 3 m
Weight marking unit 5 kg
Weight of control unit 15 kg
Mains voltage
115/230 VAC. 50/60 Hz, single-phase.
Power consumption FL2 model 450W
Type: e-SolarMark FL
Condition: gebraucht / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
Gbjdpfoq Rtz Hox Aadjk
该广告为自动翻译,可能存在翻译错误。
发送询价
电话 & 传真
+49 2861 ... 广告
这些广告您可能也感兴趣。
小广告
Wijchen
9,541 km
折弯机 HACO ERM 43250 2009
HACOERM 43250
HACOERM 43250
小广告
Haldenwang
9,458 km
折弯机
ZopfAH 40
ZopfAH 40
小广告
Wijchen
9,541 km
折弯机 Boschert Profi 28 / 1000 CNC 2014
BoschertProfi 28 / 1000 CNC
BoschertProfi 28 / 1000 CNC
小广告
Hürth
9,531 km
粉末工厂
ROMERProfiSpray V
ROMERProfiSpray V
小广告
Skarżysko-Kamienna
8,654 km
粉末喷涂机
ROMER / Catalog pricesProfiSpray
ROMER / Catalog pricesProfiSpray
小广告
Möglingen
9,514 km
按刹车
WeinbrennerGP 250/3550
WeinbrennerGP 250/3550
小广告
德国
9,303 km
带锯-自动-水平
BERG & SCHMIDK-tech 1200 H
BERG & SCHMIDK-tech 1200 H
小广告
Trittau
9,170 km
按刹车
TRUMPFTrumabend V170
TRUMPFTrumabend V170
小广告
Wiefelstede
9,320 km
离心泵
KSBETABLOC-G 50-200/852.2
KSBETABLOC-G 50-200/852.2
小广告
Skawina
8,774 km
六点涂胶机
Made in ChinaJB-1650FG-A
Made in ChinaJB-1650FG-A
您的广告已成功删除
发生错误












































































































