蒸汽轮机Škoda Plzeň
Turbogenerator set 25MW
蒸汽轮机
Škoda Plzeň
Turbogenerator set 25MW
EXW 起拍價 不包含增值稅
€1,700,000
製造年份
1995
狀況
二手
位置
捷克共和国 

顯示圖片
显示地图
机器数据
价格和位置
EXW 起拍價 不包含增值稅
€1,700,000
- 位置:
- 117, Vratimovská 689, 719 00 Slezská Ostrava, Czechia
撥打
技术细节
- 压力:
- 19 横杆
- 功率:
- 25,000 千瓦 (33,990.50 马力)
- 输入频率:
- 50 赫兹
- 温度:
- 320 °C
- 总重量:
- 93,000 千克
- 最大转速:
- 3,000 转/分
- 总长度:
- 6,200 毫米
- 冷却类型:
- 水
优惠详情
- 產品ID:
- A19313656
- 參考編號:
- TG3
- 最後更新:
- 於 06.06.2025
描述
Škoda Plzeň, Turbogenerator set, condensate steam turbine 25 MW
Manufacturer: Škoda Plzeň
Power: 25 000 kW
Type:
RPM: 3000/ min
Steam pressure: 19 bar
Steam temperature: 320 ºC
Number of Extractions:1+3
Operation hours: 201000
Gujdswqp U Ejpfx Af Aeh
The equipment is from year 1995 and has received all maintenance required for the maximum reliability, availability and capacity.
Size: 4 700 x 6 200 mm,
Weight: 93 000
Generator, gearbox, condenser, condenser pumps, oil system and all related electro and InC equipment included.
We will send all technical data on request.
The machine has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. GO was carried out by the turbine manufacturer. The last GO was carried out in 2017 for a total amount of 112.6 million CZK. The following repairs were carried out:
- replacement of the old rotor with a new one,
- repair of the flow section of the stator and the distributor wheels and supports,
- replacement of the gearbox,
- repair of the regulation, oil. Repair of the system, condensation,
- installation of irrigation and new NZ,
Maintenance and servicing was carried out in the years after the GO, the inspection for subsequent repair was planned for 2024 and did not take place.
Manufacturer: Škoda Plzeň
Power: 25 000 kW
Type:
RPM: 3000/ min
Steam pressure: 19 bar
Steam temperature: 320 ºC
Number of Extractions:1+3
Operation hours: 201000
Gujdswqp U Ejpfx Af Aeh
The equipment is from year 1995 and has received all maintenance required for the maximum reliability, availability and capacity.
Size: 4 700 x 6 200 mm,
Weight: 93 000
Generator, gearbox, condenser, condenser pumps, oil system and all related electro and InC equipment included.
We will send all technical data on request.
The machine has been regularly maintained and serviced since its commissioning. GO and SO have been carried out at intervals of about 5 years according to the actual condition. GO was carried out by the turbine manufacturer. The last GO was carried out in 2017 for a total amount of 112.6 million CZK. The following repairs were carried out:
- replacement of the old rotor with a new one,
- repair of the flow section of the stator and the distributor wheels and supports,
- replacement of the gearbox,
- repair of the regulation, oil. Repair of the system, condensation,
- installation of irrigation and new NZ,
Maintenance and servicing was carried out in the years after the GO, the inspection for subsequent repair was planned for 2024 and did not take place.
您的广告已成功删除
发生错误