滚齿机LIEBHERR
LC 200
技术细节
- 工作台直径:
- 180 毫米
- 齿轮直径:
- 200 毫米
- 铣削主轴长度:
- 230 毫米
- 主轴速度（最大）:
- 750 转/分
- A轴回转角（最小）:
- -45 °
- A轴回转角度（最大）:
- 45 °
提供
- 位置:
- Hessen, 德国
– 距离：约 9,435 公里
- 可用性:
- 拍卖结束后立即
- 交付条件:
- FCA
€10,000.00 (约束性)
免费
描述
TECHNICAL DETAILS
Max. workpiece diameter: 200 mm
Table diameter: 180 mm
Max. table speed: 100 rpm
Center distance: 15 - 400 mm
Machine stand
max. axial travel: 600 mm
Milling head swivel device
Milling head swivel angle: ± 45 degrees
milling head
Drive power: 27 kW
max. module: 7 mm
Max. cutter speed: 750 rpm
max. cutter diameter: 160 mm
max. cutter length: 230 mm
max. tangential travel: 200 mm
Max. tangential speed: 3,000 mm/min
Object
Max. counterholder travel: 540 mm
Max. counterholder rapid traverse: 15,000 mm/min
Max. counter arm force: 13 kN
MACHINE DETAILS
Total weight approximately: 15,000 kg
Ambient temperature: 15 - 38 °C
Operating voltage (tolerance +/- 10%): 400 V
Operating frequency (tolerance +/- 2%): 50 Hz
Control voltage: 24 V DC
Hydraulics
Hydraulic oil: HLP 46
max. operating pressure: 70 bar
Pump flow rate: 24 l/min
Hydraulic volume in the hydraulic tank approx.: 7 l
Max. average noise level: 82 dB(A)
廣告是自動翻譯的，翻譯中可能會出現一些錯誤。
文件
19203531.pdf (PDF)支付处理
- 购买附加费用:
- 18 %
- 付款条件:
- 100% 预付款
- 支付方式:
银行转账
优惠详情
- 產品ID:
- A19203531
- 參考編號:
- AUC-2505087
- 最後更新:
- 於 22.05.2025
- 独家优惠:
- 仅在拍卖中提供
参观
Ritthem LiebherrR 946 LC
Halberstadt LIEBHERRLC 122
德国 LiebherrR998 LC-V
Metzingen LIEBHERRLC 82
德国 LIEBHERRLC 80
Butzbach LiebherrR924 LC ZSA/Zusatzhydraulik/Klima/2017
Ritthem LiebherrR 926 LC
Schwäbisch Gmünd LIEBHERRLC 282
Sittensen LIEBHERRR926 LC, Greifer-, Hammer- u. Scherenfunktion
法国 LiebherrR906 LC Litronic with two buckets
Auction Conditions
The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.
- Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
- All prices and bids are net prices and do not include VAT.
- Stated dismantling and loading costs are binding.
- All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
- Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
- The duration of an auction may be subject to change.
- By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
- Submitted direct or maximum bids are binding.
- Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
- The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
- In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
- The General Auction Terms of Machineseeker Group GmbH apply.
Machineseeker-信任认证标志
什么是可信印章？
Machineseeker通过Machineseeker信任标志认证精选经销商。 在发放之前，Machineseeker 经验丰富的员工会进行标准化和全面的检测。
我們要檢查什麼？
查看
交易許可證 或 商業登記冊摘錄
查看交易商的
地址
確認
銀行連接
驗證
電話
是否可接通 主要的電話號碼
信用報告
中不能包含負面的must not contains negative criteria
買家投訴
會導致收回信任標誌这对您作为买家意味着什么？
通过 Machineseeker 信任标识，您作为买家无需自行检查，就可以识别出极有可能进行诚信且合法经营的可信经销商。
当然，在购买过程中仍可能出现分歧。 Machineseeker 对在 Machineseeker 上活跃的买家或卖家的法律违规行为不承担责任。